Product Description
New Arrival I-2014 Multi-Diag Access J2534 Pass-Thru OBD2 Device
Latest version: V2014.01
Support 23 brands updated, 5300 new systems (list of systems updated in Multi-Diag since DVD IV-2013).
Ideal for independent workshops require a diagnostic tool that truly multi-brand delivers in-depth information on a wide range of vehicles.
Multi-Di@g Access J2534 Pass-Thru OBD2 Device
Support Multi-languages: English, Spanish, German, French, Italian, Portuguese, Bulgarian, Croatian, Czech, Danish, Dutch, Finnish, Hebrew, Hungarian, Polish, Romanian, Russian, Serbian, Slovenian, Swedish, Turkish
Software can be used on XP and WIN7 system.
What should you pay attention to use this software:
1) DISCONNECT the internet when you install and use this software
2) Follow our I-2014V Multi-Diag Access J2534 software installation video install the software step by step
3) Software needs activation before. Please send ID (format is only 31-xxxxxxxxxxx) and your order number to sales@OBDexpress.co.uk, we will send the activation code for free.
4) After finish software installation. Go to the following folder C: \ ACTIA \ portal and then delete the file WEGT.EXE. Once delete this file. (If your software prompt you out of date when usage, do this step too)
Free download: V2014.01 Multi-Diag Access J2534 Pass-Thru OBD2 Device supported vehicle list
Description:
Multi-Di@g Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications.
Beside ECU reprogramming, with the help of Multi-Di@g Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions.
Functions:
After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):
1.Maintenance
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter
2.Air Conditioning
Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators
3.Pollution control
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe
4.Liaison to the ground
Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)
5.Body
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Rear radar
6.Post-Equipment
Setting up the radio,
Configuration loader CD,
Setting alarms
Configuration of the coupler,
Configuration bicycle loading system
7.Braking
Diagnosis of calculators ABS, ESP.
Diagnosis and unlock electric brakes.
Flush the brake system.
8.Motor
Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)
Programming of injectors
Electronic configuration of the EGR valve
9.Expert Mode
Diagnosis of advanced computers,
Configuration of comfort functions,
Change the language of the instrument panel,
physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis.
V2014.1 Multi Diag Access J2534 System Requirements:
*O.S.: Windows XP; Windows 7 32bit
*CPU: Pentium/Athlon 1.8 GHz or higher
*RAM: 256 MB of system memory
*Hard Drive: 10 GB of available space
*VCI (vehicle communication Interface)
*DVD-ROM
*No Internet, WIFI
*No Antivirus software
Installation multi-diag 1-2014:
1. Before installation to ensure not having connection networks or wifi active
2. Open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message successfully installed XXXXXX and OK
3. Start the installation folder (2) 1-2014
If during your installation software request an unlock key 31-xxxxxxxxxx contact us with the key not give you the activation key valid
Select the language it will continue the installation to completion after the message asking do you restart known not to install the following update etc once the last install
Once the message you want to ask not restart known
4. Go to the following folder C: \ ACTIA \ portal and then delete the file WEGT.EXE
5. Once delete this file, open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message successfully installed XXXXXX and OK
6. Then install: xs-ime-pt-207p-workshop.exe. You can then restart the pc
Specification:
Compliant to SAE J2534 & J2534-1
Either RS 232 or USB interfaces to PC
K-Line ISO 9141 (100 mA)
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
SCI SAE J2610
Programmable power supply
On-board memory
Please pay attention Multi-Di@g Access J2534 Pass-Thru OBD2 Device is not good at programming function. And it is not good at Japan cars.
Multi-Diag J2534 Packing List:
VCI (Vehicle Communication Interface)
DB25 to OBD-2 Male cable
OBD2 Male to OBD2 Female cable
Customer Asked Questions
Q: Do i need password when using this product?
A: Yes. When you install the software, it will give you a code. Please send this code to
sales@OBDexpress.co.uk we will send you activation code. Please be sure to set the VCI to A070026.
Q: Is that necessay to use that COM cable?
A: It is not necessay to use that COM cable, you can diectly use usb cable to connect.
Shipping Method and Delivery Time:
EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
China Warehouse Shipping:
DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement.
Yanwen Express: 7-10 working days. No Tax for European Countries.
Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
For any question, please contact us at:
Tech Service
Multi-Di@g Access J2534 language available, Multi-Di@g Access J2534 VCI serial number setting; Multi-Di@g Access J2534 setup note.
What will you do if you find the password is not valid?
1) The ID of our Multi-Di@g Access J2534 is begining with "19", and ends up with "SKL", and the format is like "19-99119BC1SKL". If your ID is not like this, or ends up with "CVD", the problem is that you do not fill the number 070026 in your VCI. Please fill the number 070026 to your VCI and get the right ID. Then send the ID to us, we will resend the activation code.
How to solve the problem that "VCI NO FOUND" for Multi-Di@g Access J2534?
Recently several customer reflect that when they use this tool, their computer cannot recognise the VCI. What caused this problem and how to solve it?
For this problem, mainly because the USB cable. We check the package that customer send back to us and find there is no problem in the main umit. At last the problem exists in the USB cable. The USB cable is connected loosely and result in the VCI cannot be recognised by computer. Please try to connectly the cable tightly, or use another USB cable to connect the computer. Or use the COM cable in the package to as a subsitate to connect the computer.
Please check the attachment: Multi Di@g Access J2534 VCI serial number.pdf.
Multi Di@g Access J2534 VCI serial number
During installation, when Multi-Di@g configuration window appears, you should set
Communication interface to USB and set VCI serial number to A070026:
After installation, MultiDiag shows message asking to get activation code:
Press green button and you will see window asking for code. Please contact us with the code (18-...)
we will send you back the correct password to enter:
During the diagnostic with the device connected, warning about 0 days left will appear. Just check
the mark "Do not display this message again" and continue the work, everything will be working
ok.
Multi-Di@g Access J2534 language available:
How to connect cables with car and computer? Here is the picture for your referance:
Notes:
1. Be sure to disable/uninstall anti-virus software
Please note, anti-virus software can flag up this item software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our this item software is completely safe and virus free and all other virus scanners confirm this.If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.
![[With Full Chip AN2131SC] High Quality V216 CAN Clip for Renault Diagnostic Interface Supports Reprogramming](/upload/pro-sm/22101916662485756013.jpg)
