CAN Clip for Renault Diagnostic Interface is designed to diagnose Renault cars models including automatically test all Renault models' computers, reporgramming,airbag test and other functions. Multi-language.
CAN Clip for Renault Diagnostic Interface
Attention: For UK customers, we can send sent this goods from our UK warehouse. If you need this, please leave message on your order to notify us.
Lastest Software Version: V188.0.3
see the following pictures shows.(Picture one shows the optional country; Picture two shows the Language available)
1. See all the information relating to the vehicle
2. Computer test
3. Automatic test of all computers
4. Airbag test
5. Ccantool (OBD tests)
6. Base Doc (access to Technical Notes)
7. Physical measurements
Renual can clip v152 is running on my Can Clip sonde for 3 weeks now. Most important : it decodes VIN for all the Reno - Dacia models manufactured till 30.06.2015.
Renault can clip crack steps
1.After finish Installation, DO NOT run your CLiP!!!
2.copy the RSRwin.ext to C:\CLIP_X91\Lib\Application\
3. Then run your CLiP, choose "Register me now" and in the next
Windows,please select "NO"!
4. Use this Key for Registration:
PCB board display:
1pc x Renault can clip Main unit
1pc x OBDII Cable
1pc x Renault 12pin Cable
1pc x USB Cable
1pc x CD software
It's very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V.I.N. and press ENTER.
Hot selling Autel & Xhorse & Launch, EU/UK Ship ＆ No Tax
Shipping Method and Delivery Time:
EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
China Warehouse Shipping:
DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement.
Yanwen Express: 7-10 working days. No Tax for European Countries.
Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
For any question, please contact us at:
How To Install / Register Renault Can CLip V188.0.3 On Win7
How to install Renault can clip 169 driver software (SP19-B,SP19-D)
Renault CAN Clip setup instruction, Renault Clip setup manual, Renault supported language and compatible car market
Renault CAN CLIP V162 free download:
https://mega.nz/#F!rVFwAQwZ!EEHQuLMV08jPwydGpz8scw (without patch)
Check the attachment about " Renault CAN Clip setup instruction,Renault Clip setup manual, Renault supported language and compatible car market".
Renault Can clip setup three main steps:
First step: set your PC language as English.
Second step: install "Crack".
Third step: install “setup.exe”, at this step, you can select the language you want.
Renault can clip 5 days left for registration:
During usage Renault Can clip, when this icon appears,it reminds you 5 days left for registration, you have three options to solve this problem:
Option one : change your computer system time. Because this system works in the following 5 days once you register SPX computer, please change the computer system time at any day earlier than the day you register SPX computer. For example, it is 24th today and you do SPX computer registration, then when this window appears, please set the computer time as 25th. When you come to 28th, please change the system time to 29th, or 30th.
Today it is 24th as follows:
Change as 25th as follows:
, then go to Windows Task Manager
" to find RSRwin.exe
, then "End Process
1. Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up Renault CAN Clip software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our Renault CAN Clip software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.
Q: Whether Renault CAN CLIP can be used for analyzing and testing the state of 2003 year later Renault Megane II, including testing the switch of electric windows.
A: Sure, it is no problem.
Q: It is said that PCB sp19-b to have been displayed which has same devices with Alliance and also supports Nissan car, is equipped with Bluetooth- module. That is true？
A: Yes, it’s truth. The sp19-b will support Nissan car so long as you install v09.021 software, but please note that you don’t install the two type software on the one computer.
Q: Whether Renault CAN CLIP (sp19-b) supports 2001 Renault 100ci?
A: It would support car but not truck in any year.
Q: For Renault CAN CLIP, all four indicator lights would be flash under normal condition, but when I enter the diagnosis menu, the can indicator will light off, which results in failing to establish connection, and the other lights keep on flashing. However, I can’t use it on my car, What should I do?
A: Here are two solutions:
1) Try to install the software on a laptop, no connection with power.
2)Try to diagnose K-line protocol car, if it works on the car but not diagnose canbus car, you can return it back to us for check with found question.
Q: It’s unable to communicate with anything when Renault CAN CLIP comes into programming pattern. What is the matter?
A: Our Renault CAN CLIP only supports diagnosis not involves programming.
Q: Sp19-b can clip v146 was connected with computer, not be found. Then, he unloaded the software and reinstalled it, but the problem that LED light was still off when the device was connected with car continues to arise. Besides, he tried to install the software to other computers and different cars, and changed the USB to connect.To his surprise, it’s still useless. So is there any problem of the device?
A: If the device is connected with different cars and computers, all LED lights are off. please return it back to us for a check.
Q: Can clip shows “unable to test”, but drivers has been installed already and four lights of host computer both flash. What is wrong？
A: You should check your can of car and try to test it on older car in k-line.
Q: Can Clip for Renault all four indicator light flash, but when I enter the diagnosis menu, the CAN indicator light off and can’t establish connection, while the other three ones go on flashing. What should I do?
A: there are two solutions: 1) try to install the software on a laptop (PC), no connection with power. 2) Try to diagnose K-line protocol car, if it works, but can’t diagnose CAN BUS car, advice you return back to us for check.
Q: How can I change English into French?
A: When install the can clip renault software, you can select the French, but after you complete installation you cannot change the language. So, you have to uninstall the software and reinstall it, during installation, select language French.
Q: I try to open Can Clip CD in several different computers, nothing in the CD.
A: Check whether it has the carving trace at the back of CD, or if the CD Boot Sector is broken.
Q: Does CAN Clip for Renault support analyze and test the status of Renault Megane II 2003 year up, and test the switch of electric windows?
A: yes, it can do.
Q: Can it do my car NENAULT of 1995? Thanks.
A: Yes, it can do Renault cars before 1996, but please tell me your car information in details, and then I can check for you!
Q: I try to install the CAN clip software on different computers, but it always shows me this error reading “SPX CLIP Registration Client” as the following picture shows.
A: Please follow our video or PDF instruction to correctly step-by-step install the software, and also install the software on the computer with XP operation system, better American English Professional version system.
Q: Does Renault Can clip work with Renault Megage 2 Phase 2 2008-2010? Can it read out and set Wheel valve information? Can make key and support wiper blade?
A: Renault CAN clip only support diagnosing, it can’t make key.
Q: When I try to program with Renault CAN Clip, no communication, what’s the problem?
A: Renault CAN Clip we supply only support diagnosis, not support programming.
Q4: Connected to the car and four lights are lit Prompted for this content: 5800 window, units of measurement appear 104 Error 5800: Please check the power supply is connected, the normal connection indicator light red flashes. If it is any problem of these two situations: reconnect, wait about 10 seconds before verification.
A4: Please follow the next two instructions to solve the problem:
1) The installed software can’t run in your computer system stably, there is no communication between the software and the device.
2). the computer USB interface does not work, try to use another one.