1. XHORSE Multi-Prog is Upgrade Version of VVDI Prog
2. Pro-level, More powerful
3. Firmware can be updated yourself by "update kit"
4. Support self-test and smart operation mode
5. Read BMW ISN and NEC, MPC, Infineon etc chip
6. With Free NEC Authorization
FormulaFLash is an all-in-one ECU and TCU tuning solution.
1. Software and hardware support online update
2. No email or password registration required, one-click activation via computer network
3. Support 3 Connection Methods: BENCH, OBD, BOOT
4. Support MD1CS018, MD1CS016, DQ381, DQ380, MG1CA094, MD1CS015, MD1CE108, MD1CC878, MD1CE100C etc.
1. Xhorse XDMLB0 MLB Tool for VW Audi Key Adapter work with VVDI2, VVDI Key Tool Plus
2. No need to disassemble the chip. Supports wireless generation.
3. Supports original keys and VVDI MLB remote key.
CGDI K2 Support Generate and copy key, Generate remote, Copy 96 Bit ID48 (No Need Token), Unlock/Renew key, Read frequency, Key identification, Signal Detection, MCU programming reading and writing, Supports Bluetooth OBD (optional) .
1. Xhorse XDMPR8GL MQB-RH850/V850 Adapter Cable for Multi-Prog
2. No need to cut wire or lift pinto read MQB48/MQB49/5C dashboards
DynoDrive is an advanced feature, exclusive to Alientech Suite and KESS3, which allows for calculating and verifying performance while driving a vehicle. Through the OBD diagnostic port and data acquisition from the integrated GPS module.
DynoDrive provides power and torque values of a car that can be exported and compared endlessly on your reserved area.
1. X-431 PAD VII is an unexpected high-end diagnostic tool from LAUNCH, comes with the ADAS calibration function, 60+ service functions, TPMS service and 8 extended modules functions.
2. With New Smartlink C 2.0 VCI, Support Remote Diagnosis!
1. 2024 Top IM608 PRO II, Newest Generation of IM608 PRO/ IM608II
2. All-In-One IMMO Services
3. Top Key/Chip Program Upgrade of IM608 PRO
4. Advanced ECU Coding Same As MS908S PRO II/MK908PRO II
5. 40+ Maintenance Services For 99% Worldwide Vehicles
6. OE-Level All System Diagnostics & Active Test
7. Extensive Vehicle Compatibility
1. All-In-One Functions: Immobilizer + ECU Cloning + Bi-Directional Control Scan + All Systems Diagnostic + CANFD & DOIP+ 39+Special Services.
2. Upgraded version of LAUNCH X431 IMMO ELITE, which adds ECU Coding functionality.
3. Support CAN FD/ DOIP Protocols, newly add AutoAuth for FCA SGW.
4. Two Years Free Update.
5. Added built-in MQB calculator, get MQB sync data for free.
1. Bi-Directional Control Scan Tool (Active Test)
2. 38+ Hot Reset Functions
3. OE Level Full Systems Diagnostics
4. Powerful Hardware Configuration
5. 99% Coverage & 2years Free Update
Autel IMKPA Key Programming Accessories Kit, compatible with the XP400Pro Key and Chip Programmer, includes 12 adapters for the XP400Pro that enables Read/ Write/ Erase for Mercedes Benz ESL_W209/ W906 Data, Mercedes Benz NEC Key Learning, BMW EWS3 Key Learning and Volkswagen/ AUDI/ BMW/ Mercedes Benz Key Unlock.
1. This is Launch renewal card 2 years update service for Launch X431 V/ V+/ Pro Mini/ ProS Mini/ DIAGUN IV/ 5C/ PRO3S+/ PRO5/ PRO3 APEX
2. You can buy it to extend 2 year subscription.
The KESS3 is the latest ECU tuning tool from Alientech that replaces both the KESSv2 and K-TAG. KESS3 gives you more control than its predecessors, KESSv2 and K-TAG, and can be upgraded without the need to spend money on new hardware. This new tool allows users to remap in a faster, easier way than ever before, with the ability to use both OBD or Bench Tuning methods from the same device. You no longer need separate tools for OBD and Bench Tuning. With the new KESS3, this is now a combined feature.
CGDI MB Prog Benz Key Programmer With EIS/ ELV Test Line and ELV Emulator
Bundle deal to save more money for you