| XHORSE MINI PROG | Other Programming Devices |
| Connect to the smartphone via Bluetooth and WiFi. To enhance the working efficiency and reduce communication failures. | Connect to the computer via USB cable. You might easily get a vehicle breakdown due to the bad contact caused by the USB cable port. |
| Support reading chip data without soldering. | Solder to PCB, which may lead to car breakdown or data loss if you are not good at soldering. |
| No need to dismantle the device or cut the wire. A user-friendly device for both green hands and experts. | Improper dismantling or cutting may increase the risk of car breakdown. |
| Support pin detection and report when it detects any problems. Largely avoid data loss. | Unable to check the status of pins and data loss may be easily caused due to solder skips. |
| Read & write most 8-pin ic chip data via its 3 pin headers directly without adapters. | Adapter needed and you need to spend a lot on buying all types of adapters. |
| Support multi-module reading & writing, such as EEPROM, ECU, etc. With this device, you can solve most of problems you encounter at work. | Support reading & writing a few modules only. You need to buy many devices to satisfy the needs of work. |
| Support data local & cloud storage, avoiding data loss due to misoperation. | Data loss may arise due to a lack of cloud storage. |
| Built-in battery ensures working without USB cables, saving a lot of trouble when you work outside. | Inconvenient to work outside with USB cable. |
| Provide professional technical backup. Problems can be resolved on Xhorse App directly by Xhorse technicians. | You can only seek help from the product dealer. |
Xhorse VVDI Mini Prog is a portable chip programmer running on IOS & Android via Bluetooth and WiFi. It's nice feature is it reads and writes data without soldering. It reads and writes EEPROM data, ECU data etc.
Overview
MINI PROG is a professional and stable, multifunction, intelligent, flexible programming device for many different chips, support connection by smart phone, easy to use！
Main Functions
Read and write EEPROM data
Read and write Module
Edit data
Read and write MCU data
Data storage
Performance:
Capacity: 2550mAh
Normal Working Hour: >5H
Standby T: >5D
Recharging Current: 1500mAh
Package List:
| Type | Quantity |
| MINI PROG | 1 |
| Push-type SOP8 1# test connector | 1 |
| Push SOP8 wide body 2# test connector | 1 |
| Push SOP8 3# test connector | 1 |
| DB15 cable | 1 |
|
EEPROM Adaptor
|
1 |
| USB convert TYPE-C cable | 1 |
|
Needle Set
|
1 set |
| Instructions | 1 |
Appearance:
Ready to use:
Scan the QR code of Xhorse APP below, or search "Xhorse" in Google Play or APP Store.
Quick Setting:
1). Press the ON/OFF button to display the boot screen
Image 4: Mini Prog boot screen.
2). Power off
Press and hold ON/OFF button for 4 seconds, MINI PROG will be shut down.
3). Button explanation
① ON/OFF button: Press ON/OFF button for 1-2 seconds to turn on MINI PROG, press and hold for 4 seconds to turn off MINI PROG.
② Start button: When MINI PROG is on and preparation is ready, press 'Start' to work.
③ Page Turning button: When the screen cannot display all content, click to 'Page Turning' to view related information.
④ Light button: After MINI PROG is connected to one of the test connectors 1, 2, and 3, if need light press the 'Light' button, the corresponding test connector light on, press again to turn it off.
4). Connect to smartphone
MINI PROG support connect to smartphone by Bluetooth or WIFI.
① Click 【Connect to device】from HOME page, available device serial number will be shown, according to SN, select proper device to connect.
② There are 2 connection ways for user selection: Bluetooth or
WIFI, according to the connection way, device will be connected automatically.
5). Recharging
Please use a 1.5A charger connect to the USB port for recharging MINI PROG. When charging in power-on status, the battery icon in device status information will be shown recharging status, indicator light on. When charging in power-off status, the indicator light on; after battery
fully charged, device will be stopped charging automatically for protecting battery.
Maintenance
Warranty and after-sale instructions
MINI PROG has one year warranty, and it is based on the date on the transaction voucher; If do not have transaction voucher or lost it, the factory date recorded by the manufacturer will prevail.
※ Situations on the below cannot get free repair
vehicle and ship for a long time;
Get main body dirty and worn due to use.
Please get in contact with dealer or scan the QR code behind the instruction, download Xhorse official APP to get after-sale and technical support.
All rights reserved. Any individual or organization is forbidden to copy or spread
in any form from this manual without permission.
Due to product improvements, the contents of this manual may change without
notice.
Pre-order Xhorse VVDI MINI PROG at reasonable price here:
https://www.obdexpress.co.uk/wholesale/xhorse-mini-prog-chip-programmer.html
