Repair FRM(3M25J Chip) without coding
Read and write BMW FRM module(FRM Footwell module) 0L15Y chip
EEPROM/FLASH data
Read and write 3M25J chip EPPROM/D-FLASH/P-FLASH data
Module Features:
1. The interface board replaces the welding wire
2. The pin connect with intelligent detection
3. The data reading and writing is safe and reliable
APP Menu:
How to use YANHUA ACDP FRM Module
Package List:
1pc x BAV-KEY adapter
1pc x BDM01 adapter
1pc x BMW-CAS3 board
1pc x BMW-CAS4 board
1pc x BMW CAS2/3/4 board
1pc x CAS3 firmware package
Shipping Method and Delivery Time:
EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
China Warehouse Shipping: DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement. Yanwen Express: 7-10 working days. No Tax for European Countries. Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
Install the fixed screws and FRM interface adapter. Note that the test pins on FRM interface adapter should be aligned with 4 test points. Lock 2 screws.
Connect the BDM01 adapter to the OBP+ICP adapter & FRM interface adapter.
Connect to ACDP and power up.
Operation
Mini ACDP APP >> Confirm in the upper right corner that ACDP connected >> BMW >> FRM >> Select according to the corresponding chip model: ICP MC9S12XEQ384(MASK: 3M25J) >> FRM Data Recovery(Automatic mode)
Confirm the ACDP device and the adapter are connected properly. Please back up all the data before performing the write operation.
Press "Confirm".
Waiting for pin detection to pass...
Press "Confirm".
Check the chip info read out:
If 4K EEPROM data is read, the FRM module data is not damaged. Please operate with caution.
If 32K Dflash data is read, the FRM module data is corrupt.
Press "Confirm".
Confirm the backup data path.
Check the frame number and other info:
If the parsed car info is incorrect, press "Cancel" to exit automatic repair.
If the info such as the car correct, press "Confirm".
