1. This is package offer for Yanhua Mini ACDP-2 Master Basic Module with Module 10 Porsche BCM Key Programming. 2. It can Support Add Key & All Key Lost for new Porsche from 2010-2018. 3. Supports original Porsche key reset/reflash.
ACDP-2 Basic Module: Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP). This module is a necessary basic configuration for every modules. Module 10：Support adding key and all key lost for new Porsche year 2010-2018; Support Porsche key refresh.
Shipping Method and Delivery Time:
EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
China Warehouse Shipping: DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement. Yanwen Express: 7-10 working days. No Tax for European Countries. Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
Step1. Remove the KVM from underneath the right hand side of the steering wheel.
Step2. Read data using ACDP.
Mini ACDP >> Porsche >> New Porsche add key/all key lost >> ICP IMMO >> MC9S12XEP100(Mask 1N35H) >> Add key(auto mode)
Please use the ACDP standard power adapter(voltage+ 12V, current >= 2.5A)
OK >> Continue
It is detected that the BCM module chip has been encypted.
Continue >> Continue
Reading PFLASH data, please wait...
Please save PFLASH data file.
Backup file succeeded.
Reading EEPROM/DFLASH data, please wait...
Please save the original EEPROM data file.
Backup file succeeded.
Please save the original DFLASH data file.
Backup file succeeded.
Step3. Write new key data using ACDP.
Notes:
Keep the ACDP device power-on. Disconnect the OBP+ICP adapter and ACDP device firstly.(keep the OBP+ICP adapter, BCM interface board and BCM module connected).
Connect the ACDP device to the BAV-KEY adapter and put the key correctly in the BAV-KEY adapter.
Reading key info...
Select a key position: Key5
Programming key... please wait
Please store the DFLASH data file after adding a new key.
Backup file succeeded.
Step4. Write new key data back to module using ACDP.
Notes:
Keep the ACDP device power-on. Disconenct ACDP device and BAV-KEY adapter firstly.
Then connect ACDP device, OBP+ICP adapter, BCM interface board and BCM module.
Check the crystal oscillator package of BCM module: EXT1 short - circuited for ceramic packaged crystal oscillator, EXT2 short - circuited for metal packaged crystal oscillator.
Continue >> Continue
Backup file succeeded.
Reading EEPROM/DFLASH data, please wait...
Please save the original EEPROM data file.
Backup file succeeded.
Please save the original DFLASH data file.
Backup file succeeded.
Please select the DFLASH data file after adding a new key.
Wirting EEPROM/DFLASH data...
Adding key completed. Please install the BCM module back to vehicle to confirm that new key can be used normally.
Step5. Reinstall module to the vehicle and test the remote.
