1. Online Version Kess V2 Firmware V5.017 support online service, newly add 140+ protocols,no tokens Limitation, program safer and more stable!
2. Newest software: Ksuite V2.47;Latest Firmware: V5.017
3. Red PCB
4. Get ECM TITANIUM V1.61 with 18475 DRIVER for free, sent online
Newest K-Suite V2.47 Software ,Newly Add 7400+ Vehicles
VAG OBD Helper Cable for VW Audi Skoda Seat 4th IMMO Add Key & All Keys Lost via OBD works with Xhorse VVDI2/Lonsdor K518/SMOK
V54 FGTech Galletto 2 Master 0475 EURO Version is unlocked version, support online operation, add much more and newer vehicles and ECU protocols than FW 0386, fixed all unstable problem and errors which FW 0386 had
JMD Handy Baby 2 II Key Programmer, you can copy 4D/46/48/G/ID48 96bit key chips.
LAUNCH X431 CRP423 OBD2 Code Reader Scanner support Engine/ABS/Airbag/
1.5 inch IPS touchScreen
2.Support 47 car brands
3.One click update online with free update
4.Global version No IP limited
Xprog V5.84 adds new authorizations: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
Support reading eeprom
This package include MB BENZ eCOM CAN DoIP and MB SD Connect Compact C4 Diagnosis Tool and software HDD
Read the chip data, read and write ECU data, read gearbox data etc at a high speed.
1. It works for both Citroen and Peugeot.
2. This is OBD version, More convenient to use.
3. Lexia-3 PCB edge is golden with original full chips.
4. lexia-3 relays are 12pcs, which are 4.5V, it is more stable!
5. Support multi-language
1. Lonsdor K518IS is an universal key programmer for all makes from Europe, America, Asia and China, also it can perform odometer adjustment for some makes.
2. Lonsdor k518 Key Programmer are built-in Volkswagen 4th 5th adapter & RFID transponder reader / writer, program Toyota/Lexus smart key all key lost via OBD and free BMW FEM key programming (for all keys lost, enter 32-bit ISN code).
This is a new upgraded version of DSPIII in 2019. The new version will support most of the MQB platform models and cover all vehicle models in the old version!
eCOM DoIP For Mercedes eCOM DoIP Diagnostics & Programming,ACTIA eCOM DoIP Multiplexer Replace Xentry Diagnosis VCI
1. Support Work With Xentry, Vediamo & DTS Monaco.
2. Support DoIP for latest E and S series.
3. MB eCOM DoIP diagnostic C5 Xentry Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5.
This is V2018.12 Full Version BMW E/F Scanner II, Support Diagnosis + IMMO + Mileage Correction + Coding etc..
1. Renolink is a professional programming device for programming electronic control units in Renault and Dacia vehicles, including new models recently produced.
2. Renolink has many features like UCH matching, airbag programming,engine ECU programming, key coding, key deletion, dashboard coding,eprom and flash reading and writing in Renault and Dacia vehicles.
1. It is a new generation of the SBB Key Programmer, the replace version.
2. Support Toyota, Honda and Ford ... 2019
3. Support Toyota G Chip
4. It is without limited tokens.
Now SBB PRO2 Key Programmer Updated to V48.88 Version.support new cars to 2019.1. like for Acura , Chevrolet ,Buick , Cadillac, GMC , Ford ,Dodge ,Toyota ...
LKE is a car smart key emulator newly released by Shenzhen Lonsdor Technology co.,ltd, as an ancillary product for K518 device. It supports functions such as collect data(sent from automobile ignition coil) to detect the coil fault and decode car keys; simulate key chip(4D and 46 chip are supported currently, more chip types to be continued). It’s lightweight and convenient, and can match all the vehicle models with 4D or 46 chip by working with K518. Meanwhile, LKE adopts low-power design, and has CR2032 button battery installed externally, which is easy to replace batteries and can avoid damage to casing. It can be upgraded through K518.
V1.95 KTMOBD ECU Programmer & Gearbox Power Upgrade Tool support read the chip data, read and write ECU data, read gearbox data etc at a high speed.
Xhorse Condor Dolphin -XP005 Key Cutting Machine is new key cutting machine from Xhorse brand,and it is used on App via bluetooth,support both IOS and Android.
J2534 compatible adapter;
Being supplied together with the J2534 interface library, Dialink can be used for ECU reprogramming with CombiLoader or for diagnostics with any third-party tools;
Suitable for SMS-Diagnostics 3;
Together with SMS-Diagnostics 3 software it can be used for diagnostics of modern vehicles control systems with the standard SAE J1962 diagnostic connector (connection to other diagnostic connectors is achieved by the use of additional adapters).