1. Supports soldering to read and write SOP44 package and TSOP48 package parallel FLASH chips, such as AM29FXXX, M29FXXX, TB28FXXX series.
2. Supports reading and writing common 8-pin chip data.
3. Work with Xhorse Multi-Prog Programmer
PCF79XX Adapter works together with VVDI PROG Programmer, used for PCF79XX Chips.
VXDIAG VCX CAN FD is new generation diagnostic tool by ALLSCANNER VXDIAG, Support Both GM and Ford/Mazda with new CAN FD protocol.
Support WIFI DoIP.
D7S is an automotive smart diagnostic system with a 7-inch LCD display and Android 10 OS, which is designed for mechanics, electricians, and car maintenance shops. It supports automotive diagnostics for full-system, including reading ECU version information, reading fault codes, live data, and freeze frames. 36+ common special functions are supported, such as throttle matching, ABS bleed, maintenance light reset, EPB test, SAS, BMS, injector coding, DPF regeneration, and TPMS reset. 98% vehicle coverage, work on more than 100 brands, 10000 cars.
XTOOL D7W is an automotive smart diagnostic system with a 7-inch LCD display and Android 10 OS, which is designed for mechanics, electricians, and car maintenance shops. It supports automotive diagnostics for full-system, including reading ECU version information, reading fault codes, live data, and freeze frames. 38+ common special functions are supported, such as throttle matching, ABS bleed, maintenance light reset, EPB test, SAS, BMS, injector coding, DPF regeneration, and TPMS reset. 98% vehicle coverage, work on more 100 brands, 10000 cars.
XTOOL D8S is an automotive smart diagnostic system with 8 inches LCD display, which is designed for mechanics, electricians, and car maintenance shops. It supports full OBDII function and automotive diagnostics for full-system, including reading ECU version information, reading fault codes, live data, and freeze frames. 38 common special functions are supported, such as throttle matching, ABS bleed, maintenance light reset, EPB test, SAS, BMS, injector coding, DPF regeneration, and TPMS reset. 98% vehicle coverage, work on more than 85 brands, 10000 cars.
LAUNCH X-431 PROS ELITE is an 8-inch smart car diagnostic device developed based on Android 10.0 system. It adopts 2.0Ghz 4-core high-efficiency processor, 4GB RAM+64GB ROM large storage, and is equipped with a high-endurance battery, which runs faster, more stably and lasts longer.
1. Support D49 (New), ID4A (New), MQB (New), ID46 (Improved), ID47 (Improved), PCF7935 (33/40/41/42/43/44) (Improved), ID4E, ID4C, ID4D (60/63/67/69/70/72g/80/83), ID48, ID8A, ID8C, ID8E, PCF7936 (46), ID11/12/13.
2. 10pcs/lot
1. Support mutiple key blank type
2. Perfectly replace the original smart key
3. Dedicated remotes are required for vehicles like Toyota. Hyundai 8A, etc.
1. ACDP-2 Module 25 VW/Audi 0DE gearbox mileage correction
2. Support VW/Audi DQ380(0DE), DQ381(0DE), DQ500(0DE) gearbox mileage correction.
1. Renault can clip software v219 and PSA Diagbox Software.
2. Support wifi and Type C USB.
3. Support Diagnosis for All Systems CANBUS
4. Support passthru j2534 programming with original online account.
LAUNCH ADAS Software Activation Card activates ADAS Static Calibration function for any LAUNCH X-431 Pro and PAD series scan tool enabling your diagnostic tool to perform calibration functions using any LAUNCH ADAS PRO and Mobile equipment.
1. Yanhua ACDP-2 Module 3 BMW ISN Module.
2. Support Reading/writing BMW DME ISN(Necessary when all-key-lost).
3. Read/write N20/N55/N13 ISN code via OBD. Read/write MSV80/MSD85 ISN code without opening DME shell. Read/write other DME ISN code by opening DME shell.
XTOOL XV100 industrial endoscope can be widely used not only for automobile inspections, but also for inspections in any hard-to-reach area at home, in the office or factory. Since XTOOL XV100 endoscope inspection camera can help you to inspect areas that is normally inaccessible, it is easier to find the solution with it.
New Lonsdor K518 Pro Key Programmer Device Support Most Car Models On the Market , Luxury , Domestic and Popular Cars all Included, Support 24V lorry and Heavy Trucks.
Lifetime Free Update.
The tire pump for car is equipped with a large LCD screen that simultaneously displays the current and preset pressure, 4 preset inflation modes for inflating bicycles, motorbikes, cars and balls, automatically stops when the preset value is reached, you don't need to worry about over-inflating at all, the manual mode allows you to set the pressure value depending on the object to be inflated. four units to choose, PSI、KPA、BAR、KG/CM²
1. Support All ZF 8HP Gearbox Clone.
2. Support VW/ Audi DQ380/ DQ381 0DE, Mercedes-Benz 9GT(VGS-NAG3), BMW 7-dual-clutch(GETAG 7DCT), BMW 7-dual-cluthch(TEMIC DKG) gearbox clone.
3. No soldering, No wiring, No annual fees.
Yanhua ACDP-2 DME ECU Clone Package with Module 3/8/15/18/27 and 12 Bench Interface Boards for BMW and Mercedes Benz
1. Support Mercedes Benz DME Refresh Clone
2. Support Mercedes Benz Gearbox Refresh Clone
1. This package including Xhorse VVDI2 Full Version and VVDI PROG Programmer
2. Package offer saves you money than buying them alone.
