MK906BT Functions:
1. All System Diagnoses
By penetrating all available ECUs, including but not limited to PCM, ECM, EPS, PDM, TPM, BCM, ABS, SCCM, etc., MK906BT retrieves information and performs OE-level diagnostics on all available vehicle systems, like read and clear codes, view data stream and vehicle information, ECU Replacement, Zero Point Calibration (Toyota), Signal Check (Toyota), Initialization (ECU), and Guided Function (VAG). It not only enables you to troubleshoot promptly but also makes you customize the configuration.
Read & Clear Codes on All Available Modules
Autel MaxiSys MK906BT, it can access wirelessly via Bluetooth connection ALL available vehicle modules including but not limited to PCM, ECM, EPS, PDM, BCM, TPM, SCCM, RADIO and etc. With complete capability for codes, it can read and clear codes on all systems and subsystems and be able to show live PID data of multiple sensors in graph & text.
Bluetooth Wireless Diagnosis
The Autel MaxiVCI allows the bluetooth diagnostic scanner to communicate with the DLC via Bluetooth and lined USB connection. With an ultra long working range of about 164 feet (about 50m), you can perform vehicle OE-Level All Modules diagnosis and services remotely without worrying about the cable might not be long enough or the limited space and hot air in your car.
Bi-directional Control
Bi-directional Control not only performs various bi-directional tests to check the operating conditions of ABS and SRS, but also applies to functions such as Component Test and Active Test, Actuator Test. Active Test is used to access vehicle-specific subsystem and component tests. During an active test, the tester outputs commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch, between two operating states.
Auto VIN Technology
Autel MK906BT diagnostic system features the latest VIN-based Auto VIN Scan function to identify CAN vehicles in just one touch, which allows the technician to quickly detect vehicles, scan all the diagnosable ECUs on every vehicle and run diagnostics on the selected system.
Advanced ECU Coding & Online Coding
With the advanced ECU coding function, the MK906BT professional diagnostic scanner empowers you to establish full data links with electronic control units via VCI for vehicle diagnosis, repairs, or coding. It also features online coding and personalization for high-end vehicles:
1) Support online coding for BMW;
2) Support online coding, guided function, modifications for Volkswagen;
3) Support ECU coding, ECU online coding, and guided function of providing repair tips after
4) Reading DTCs for Porsche;
5) Support ECU online coding for Renault;
6) Support customized configuration for Toyota, Nissan, Peugeot, and more.
Coding functions are usually used by advanced specialists. Coding is conditionally divided into two types:
The first is the computer coding during replacement, commissioning, used to install a new computer in the car. When performing the procedure, the computer is informed of vehicle's VIN, the configuration and other information necessary for correct operation.
The second is the coding of the computer for tuning the body electronics to the user, usually the BCM. The procedure will allow you to offer the customer individual customization of the car for him, locking the doors, setting alarms, the function "lead to home", setting the salon and outdoor lighting, etc
IMMO Keys/Key Fob
The IMMO service of MK906BT can disable a lost vehicle keys and program the replacement key fob. One or more replacement key fobs can be programmed.( Before programming,please check and erase the fault codes. )
Note: Key function is only available for most vehicles with low security level, not applicable to vehicles with high-level safety systems such as BMW,Benz
Digital and Graphical Display of Parameters
Using MaxiSys you can display the parameters of the system conveniently. Some parameters are more likely to be monitored in analog form, for example, pressure. Some parameters are more conveniently viewed in graphical form, by observing their change in time (potentiometers, oxygen sensor). Some parameters must be displayed in the graph to observe changes relative to each other (for example, air mass flow and engine speed). Only in MaxiSys all these ways of displaying are available for all parameters and all components, regardless of the makes and models of the car.
Special Tests
The actuators are not always visually visible or too complex to assess their performance with organoleptic (eyes, ears) methods through normal activation. That's why the test-components are implemented in MaxiSys scanners. Test-components will allow you to include special test modes in the computer, in which the electronic system itself creates conditions for verification and evaluates its results with further recommendations to the expert
Adaptation and Initialization
After replacement, for repair or cleaning of some sensors and many actuators of electronic systems, an adaptation or initialization procedure is required. When performing this procedure, the basic values of their work, the reference point, are established. In a modern car, there are many such elements that require similar procedures, which makes these functions vital for the service. In MaxiSys systems, these procedures are presented at the dealer level.
2. Special Functions:
1. Oil Reset Service: Reset service mileage and service intervals for the Engine Oil Life system.
2. TPMS Service: Quickly look up the tire sensor IDs from the vehicle's ECU,perform TPMS programming and reset procedures after tire sensors are replaced.
3. SAS Service: Perform calibration for the Steering Angle Sensor and automatically cleared the fault memory.
4. DPF Regeneration Service: Clear the blockage through continuous burning of the particulate matter captured in the DPF filter.
5. ABS/SRS Services: Perform various bi-directional test to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System,such as Automated Bleeding,Pump Motor Test,and checking Module information,etc.
6. EPB Service: Deactivate and activate the brake control system,assist with brake fluid control,open and close brake pads,and set brakes after disc or pad replacement,etc.
7. BMS Service: Allow the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
8. IMMO Service: Disable a lost vehicle keys and program the replacement key fob.
Widely Vehicle Coverage
Asian: Acura, Daihatsu, Hyundai, Infinit, Kiat, Mazda, Nissan, Scion, Subaru, Toyota, Manhindra, Proton, Daewoo, Honda, HyundaiCV, Isuzu, Lexus, Mitsubishi, Samsung, Ssang Yong, Suzuki, Fuso, Perodua, Tata
European: VW, Abarth, AstonMartin, MINI, Sprinster, SKODA, Citroen, Fiat, Lancia, Maserati, Opel, Porsche, SAAB, Vauxhall, Seat, Bugatti, Audi, ForEU, BMW, Alfa, Benz, Maybach, Ferrari, Jaguar, Land Rover, Peugeot, Renault, Smart, Volvo, Lamborghini, Bentley, Rolls-Royce, VW CV, Dacia, LT3
USA: Chrysler, Dodge, Ford, GM, JEEP
Autel MK906BT Add-on Functions:
The MK906BT automotive scan tool has additional features that take smart diagnostics to a new level:
1) Remote Control: support at any time, from anywhere, real-time push notifications and software updates over the Internet
2) Shop Manager: record customer and vehicle information and for easy access and management
3) Data Manager: uninstall manufacturer software, delete pictures and edit diagnostic records
4) MaxiFix (an online troubleshooter database) :to access a vast database of repair and diagnostic tips along with proven filed fixes.
Adaptation and Initialization:
After replacement, for repair or cleaning of some sensors and many actuators of electronic systems, an adaptation or initialization procedure is required. When performing this procedure, the basic values of their work, the reference point, are established. In a modern car, there are many such elements that require similar procedures, which makes these functions vital for the service. In MaxiSys systems, these procedures are presented at the dealer level.
Special Tests:
The actuators are not always visually visible or too complex to assess their performance with organoleptic (eyes, ears) methods through normal activation. That's why the test-components are implemented in MaxiSys scanners. Test-components will allow you to include special test modes in the computer, in which the electronic system itself creates conditions for verification and evaluates its results with further recommendations to the expert
Digital and Graphical Display of Parameters:
Using MaxiSys you can display the parameters of the system conveniently. Some parameters are more likely to be monitored in analog form, for example, pressure. Some parameters are more conveniently viewed in graphical form, by observing their change in time (potentiometers, oxygen sensor). Some parameters must be displayed in the graph to observe changes relative to each other (for example, air mass flow and engine speed). Only in MaxiSys all these ways of displaying are available for all parameters and all components, regardless of the makes and models of the car.
Specifications
| Item |
Description |
| Operating System |
AndroidTM 4.4.2, KitKat |
| Processor |
Samsung Exynos T5260 6-Core Processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15) |
| Memory |
2 GB RAM & 64 GB ROM |
| Display |
8.0 inch LED capacitive touch screen with 1024x768P resolution |
| Connectivity |
Wi-Fi (802.11 b/g/n)
USB: 2.0
Mini USB 2.0
Wireless BT V2.1+EDR, Class1
HDMI 1.4a
SD Card (support up to 32GB) |
| Camera (rear) |
Rear-facing, 8.0 Megapixel, AF with Flashlight |
| Sensors |
Gravity Accelerometer, Ambient Light Sensor (ALS) |
| Audio Input/Output |
Microphone
Single Speakers
3-Band 3.5 mm stereo/standard headset j |
| Power and Battery |
10,000 mAh 3.7 V lithium-polymer battery
Charging via 12 V AC/DC power supply |
| Input Voltage |
12 V (9-35 V) |
| Power Consumption |
5 W |
MK906BT VS MK906
