1. Professional Key Programmer
Autel IM508 is a professional car diagnostic scanner that provides extraordinary service functions for the immobilizer system, including: immobilizer system status, key learning, key add, all keys lost, remote control learning, remote control add, chip read and write. It' s a professional solution for car keys and remote controls and prevents your car from being stolen!
Smart Mode– accesses to a function menu where each function is configured as a smart guidesystem.
Expert Mode– accesses to a function menu where each function is separated from each other.
1) Read PIN / CS (All Key Lost)
2) Key Generation
3) Key Learning
4) Remote Learning
5) Backup / Restore IMMO Data
6) IMMO ECU Reset / Adaptation
7) IMMO ECU Refresh / Coding
8) BMW FEM / BDC Key Learning and ECU Adaptation
9) VW / AUDI MQB Key Learning, 48 Transponder (96-bit) Add Key, All Key Lost, A6 All Key Lost, and More
The IMMO application requires a data link to the IMMO electronic control system of the test vehicle for diagnosis via OBD II connection.
The application retrieves vehicle IMMO information and performs IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc.
2. XP200 KEY & CHIP PROGRAMMER
The XP200 is specially designed to read Volkswagen vehicle key chip data, clone and generate exclusive keys, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs. By working with diagnostic tool and PC that are both loaded with programmer software, the XP200 can read/write key chip data quickly and accurately.
1) Key Read / Write
2) EEPROM / MCU Read / Write
3. OE-Level All Systems Diagnosis for 80+ Vehicle Makes
Autel IM508 Car Scanner can perform OE-Level diagnosis on all car electronic systems like ABS, SRS, Engine, Transmission and etc and show live data of multiple sensors. It is compatible with more than 80 American, Asian and European makes and models.
1) All Systems Diagnostics
2) AutoVIN / AutoScan
3) Read / Erase Codes
4) View, Record, Playback Live Data
5) View Freeze Frame Data
6) Shop and Data Manager Applications
4. Most Commonly Used Service Functions:
As a professional diagnostic scanner, IM508 comes with most useful service functions like Oil Reset, Reset Parking Brake Pads after replacement, SAS Calibration, TPMS Sensors ID Relearn, BMS and performing active tests to test the integrity or functionality of individual system or component.
Oil Rest Service: This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required.
EPB Service: This function has a multitude of usages to maintain the electronic braking system safely and effectively. The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.
SAS Service: Steering Angle Sensor Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. Therefore, the front wheels and the steering wheel must be set exactly to the straight-ahead position before calibration.
TPMS Service: This function allows you to quickly look up the tire sensor IDs from the vehicle's ECU, as well as to perform TPMS replacement and sensor test.
BMS Service: The BMS (Battery Management System) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
DPF Service: This function is used to manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5. Auto Scan Technology
The Autel IM508 professional OBD2 scanner comes with Auto Scan function that performs a comprehensive scanning over all the ECUs in the vehicle to locate systems' faults and retrieve DTCs for efficient diagnosis.
6. Live Data & Review Freeze Frame Data
The IM508 car diagnostic scanner reads codes, show live data of multiple sensors in or graph or text, clears codes. The Review Data section allows you to playback the recorded data frames of live data streams.
7. Remote Technical Support
The Remote Desk application launches the TeamViewer Quick Support program, which is a simple, fast and secure remote control screen. You can use the application to receive ad-hoc remote support from Autel's support center, colleagues, or friends, by allowing them to control your MaxiIM tablet on their PC via the TeamViewer software
How to Update Autel MaxiIM IM508?
1. Make sure the Display Table is connected to power source with stable access to the Internet.
2. Tap the Update application button from the MaxiIM Job Menu or tap the update notification message when received one;or tap the Update icon on Vehicle Menu in Diagnostics application.The Update application screen displays.
3. Check all available updates:
* If you device to update all the items of IMMO software,select IMMO Tab and then tap the Update All button;if you want to update all items of diagnostic software, select Diagnose Tab and then tap the Update All button.
* If you only want to update one or some of the item(s),tap the Update button on the right colum of the specific item(s).
4. Tap the Pause buttons to suspend the updating process.Tap Continue to resume the update and the process will continue from the pause point.
5. When the updating process is completed,the firmware will be installed automatically.The version will replace the older version.
|Operating System||AndroidTM 4.4.4|
|Processor||Cortex-A9 processor (1.6 GHz)|
|Display||7-inch LCD capacitive touchscreen with 1024x600 resolution|
|Connectivity||Mini USB 2.0
Micro SD card (supports up to 32GB)
|Sensors||Ambient light sensor for brightness auto changing|
|Audio Input / Output||Input: N/A
|Power and Battery||3.7 V/5000 mAh lithium-polymer battery, Charges via 5 VDC power supply|
|Tested Battery Life||Around 4.5 hours of continuous use|
|Battery Charging Input||5 V/1.5 A|
|Power Consumption||500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V|
|Operating Temp.||0 to 50°C (32 to 122°F)|
|Storage Temp.||-20 to 60°C (-4 to 140°F)|
|Operating Humidity||5% - 95% non-condensing|
|Supported Automotive Protocols||ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW,
SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
|Product||Autel IM508||Autel IM608||Auro Otosys IM100||Auro Otosys IM600|
|Smart Mode(Guided and Automated Key Learning Function)||√||√||√||√|
|Expert Mode(Advanced Key Learning)||√||√|
|Auto Detect Make/Model/Year/System||√||√||√||√|
|Read Pin/CS(All Key Lost)||√||√||√||√|
|IMMO ECU Reset/Adaption||√||√||√||√|
|IMMO ECU Refresh/Coding||√||√||√||√|
|Backup/Restore IMMO Data||√||√|
|Audi Q5/A4/A5 2015-2017
|BMW FEM/BDC Key Learning and Adaption||√||√||√|
|Mercedes Key Learning||√||√|
|Benz 3rd Generation IMMO Add Key,All Key Lost,Key Learning||√|
|BMW FEM/BDC Key Learning and ECU Adaption||√||√|
|BMW CAS4/3/2 Key Learning||CAS4 Available when Connected to XP400||√|
|VW/Audi MQB(VDO & JCI)Add Key,IMMO V A4/A5/Q5 2015+ Key Learning||√|
|VW/Audi/Skoda/Seat IMMO III/IV/V Add Key,All Key Lost||√||√|
|Key Read/ Write||√||√|
|EEPROM Read/ Write||√||√||√||√|
|MCU Read/ Write||Basic||Advanced||Basic||Advanced|
|ECU Read/ Write||When Connected to XP400||√|
|MC9S12 Encryption Chip Read/ Write||When Connected to XP400||√|
|IC Card Read/ Write||When Connected to XP400||√||N/A||√|
|Mercedes Infrared Key Read/ Write||When Connected to XP400||√||N/A||√|
|Remote Frequency Detect||When Connected to XP400||√||N/A||√|
|Support PC||When Connected to XP400||√|
|All System for Over 80 Markes and Models||N/A||√||√||√|
|AutoVIN/ Auto Scan||√||√|
|Read/ Erase Codes||√||√|
|View, Record, Playback Live Data||√||√|
|View Freeze Frame Data||√||√|
|Shop and Data Manager Application||√||√|
|MaxiFlash JVCI ECU Reprogrammer(Bluetooth/ USB Cable)||N/A||√||N/A||√|
|Advanced Service Functions|
|Oil Serive Reset||√||√||√||√|
|Parking Brake Pad Relearn After Replacement||√||√||√||√|
|Steering Angle Sensor Relearn||√||√||√||√|
|Battery Registration and Reset||√||√||√||√|
|Diesel Particulate Filter Regeneration||√||√||√||√|
|Tire Pressure Monitoring System Sensor ID Relearn||√||√||√||√|
|VW/Audi Component Protection||N/A||√|
|Complete Service Functions||N/A||√||N/A||√|
|Built-in Rechargeable Lion Battery||5000 mAh||15000 mAh||5000 mAh||15000 mAh|
|Processor||Cortex-A9 Processor||Cortex A7+A15 Six-Core Processor||Quad-Core Processor||Hexa-Core Processor|
|Camera||N/A||8.0 Megapixel||N/A||8.0 Megapixel|
|Note: XP400 can be pruchased separately
Some listed functions are manufacture dependent. Constantly update MaxiIM for current vehicle coverage. Update software regularly for most accurate tool features.
Since the operation process is very simple and fast, it takes a few minutes to get it done, there is really nothing to say, so this time just briefly share the process.
100% working: Autel MaxiIM IM508 and XP200 add MQB key non keyless for 2016 SKODA OCTAVIA . Aftermarket MQB key used.
Backed up EEPROM then started key learning, generate dealer key success in a few secs, Learn key success and remote synched automatically!
Easy job. 15 mins with cutting.
This is done in advanced mode and MQB
I take two corresponding images below:
Moreover, someone wonder if Autel im508 and XP200 can add key for Passat, I've see it is listed in the official coverage.
Alright, Autel IM508 surprises me with what it can do. Hope you too.