Benz software include two versions of PASSTHRU & PDU, including DAS, Xentry software. Version of PDU support new car models of 222, 213, 205 etc, other car models need to usepassthru version to diagnose. Not support old models of 210, 203, 220 with K-Line communication. It support connections of WIFI, LAN and USB.
Vxdiag C6 Multi Diagnostic Tool for Mercedes Benz
1. Support Mercedes-Benz
2. VXDiag support add more original software in feature, you only need buy authorization from us, Such as BMW, GM, Ford, Mazda, Toyota, Honda, LandRover, Jaguar, Subaru, Volvo, VW etc..
3. With the innovation design of OBD II intelligent bus protocol routing hardware, a diagnostic plug can be intelligent identification test all models, fully meet the future demand for all kinds of bus communication
4. VXDiag Multi Diagnostic Tool can compatible with original Benz software if you have, we also provide software Hard disk which can compatible with Most laptops. ( at least 2GB memory, recommend 4GB memory )
5. Hardware support 4-way CAN BUS and 2-way K - Line / L-Line, support multi-protocol high-speed and concurrent communication
VXDIAG for BENZ function introduction
Benz software include two versions of PASSTHRU and PDU, including DAS, Xentry software. Version of PDU support new car models of 222, 213, 205 etc, other car models need to usepassthru version to diagnose. Not support old models of 210, 203, 220 with K-Line communication. It support connections of WIFI, LAN and USB.
VXDIAG For XENTRY Software Show:
Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercedes Benz & Smart vehicles
Functions: Star Diagnostic & programming (SCN Coding)
VXDIAG C6 Features:
can be used for all model series of For Mercedes For Benz vehicles
supports DoIP, and has more functions during SCN Coding than SD C4/C5
performs functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
no longer update– firmware updates required on rare occasions
does not need a power supply unit for external power supply
comes with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Tyre Pressure Control
D2b Command & Audio Gateway (D2B and MOST networks)
Headlamp Range Adjustment
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems
The new VXDIAG for XENTRY Diagnosis VCI (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs,
and programming electric and electronic on-board vehicle systems.
The VCI does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or USB connection.
1. Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only.
If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2. You also can watch more videos to get more technical support from official website: http://www.vxdiag.net
3. This VXDIAG can't support All Key Lost, needs one key at least.
Processor: Pentium 4 / 1.6GHz+
Memory: 1G Bytes or more
Hard disk: 40G or more
Display: Resolution 1024x768 or higher
Network interfaces: LAN 10 / 100M or 802.11b/g
Communication Interface: USB2.0 or USB3.0
RAM 32bit180MHz ARM
FLASH 1MByte FALSH
Diagnostic Port 24PIN, self-determination design
LED 4 LED indicator light, indicate power and status.
Power DC 9V-36V
Working Temperature -20°C~70 °C
Storage Temperature -40°C~85 °C
Warranty: One Year
1pc x ALLSCANNER VXIDAG C6 Main Unit
1pc x OBD cable
1pc x USB cable
1pc x network cable
Shipping Method and Delivery Time:
EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
China Warehouse Shipping:
DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement.
Yanwen Express: 7-10 working days. No Tax for European Countries.
Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
For any question, please contact us at: