OBDSTAR MT200 Radio Decoding Tool with OBDSTAR APP can read & write EEPROM, and read & change code on Ford Radio by bench/OBD. It has been tested on Ford 6000 CD, SONY TMS470 and SONY NEC70F3357 successfully by the OBDSTAR Official Technical team.
OBDSTAR MT200 Ford supported models (via OBD/ bench):
TMS470AVF689APZA+24C16
TMS470R1VF48BPGEA+24C16
TMS470R1VF288PZA+24C16
NEC70F3357+24C16
Including but not limited to the following models or radio models:
Ford 1500 RDS Medialess, 6C1T-18C838-AH, TMS470AVF689
Ford 5000C Tape – KW2000, 6S61-18K876-AG, TMS470AVF689
Ford 5000C, 6S61-18K876-AF, TMS470AVF689
Ford 6000 CD Single CD – KW2000, 6S61-18C815-AF, TMS470AVF689
Ford 6000 CD Single CD – KW2000, 6S61-18C815-AG, TMS470AVF689
Ford 6000 CD Single CD – KW2000, 6S61-18C815-AH, TMS470AVF689
Ford 6000 CD, 6S61-14C044-AB, TMS470AVF689
Ford 6000 Single CD – GGDS, 6C1T-18C815-AH, TMS470AVF689
Ford 6000 Single CD – GGDS, 6M2T-18C815-AF, TMS470AVF689
Ford 6006 CDC, 6C1T-18C815-BH, TMS470AVF689
1.OBDSTAR MT200 read and change radio code on SONY TMS470- OK
Tools required:
OBDSTAR MT200 main unit
Mini USB upgrade cable
120 ohm resistor
Jumper
Ford VISTEON SONY TMS470 Radio
Procedure:
Determine the ford radio model by identifying the appearance and label of the module.
Open OBDSTAR APP, tap Dash/Airbag/ECU/Radio icon, select Radio Pinout (MT200)>> FORD>> Visteon Sony (TMS470)
Follow the corresponding pinout to connect OBDSTAR MT200 Handheld Radio Decoding Tool and Sony (TMS470) Radio with jumper, and also connect to a 12V power supply
Note: For CANH & CANL, a 120 ohm resistor needed in series.
After connection, select FUNCTION>> OTHER FUNCTION>> Radio Code V30.01>> FORD>> Visteon Sony >> TMS470 >> BENCH
Perform the functions supported in sequence:
1.Read EEPROM (24C16)
Read EEPROM data is 1111 and save it with a file name
For saving data, the OBDSTAR Mini USB Upgrade Cable can be used to connect to computer for transmission. Other EEPROM data can also be written to device for use.
2.Code Read
Read the code is 1555
Input the related pincode on Ford radio, and press Key "*" for confirmation
It can be adjusted normally. Pincode verification is successful.
3.Code Change
Input a new code 1111 and cofirm the value
Power off for 10s, then verify that the pincode change was successful.
Input the related pincode on Ford radio
It also can be adjusted normally. Pincode change is successful.
2.OBDSTAR MT200 read and change radio code on SONY NEC70F3357- OK
Tools required:
OBDSTAR MT200 main unit
Mini USB upgrade cable
120 ohm resistor
Jumper
Ford VISTEON SONY NEC70F3357 Radio
Use the same steps as SONY TMS470 to test
Connect MT200 and Ford radio with the pinout
Select FUNCTION>> OTHER FUNCTION>> Radio Code V30.01>> FORD>> Visteon Sony >> NEC70F3357 >> BENCH
Read EEPROM- success
Read code- success
Change code - success
3.OBDSTAR MT200 read and change radio code on Ford 6000 CD TMS470- OK
http://blog.obdexpress.co.uk/2023/05/04/obdstar-mt200-change-ford-6000cd-radio-code-by-bench/
