ALIENTECH KESS V3 User Feedback: Which ECUs KESS V3 is suitable for


Matched product:

Original ALIENTECH KESS3 Master Car OBD + Car BOOT BENCH Protocols Activation

Original ALIENTECH KESS3 Master Car OBD + Car BOOT BENCH Protocols Activation

Latest price:7,580
3,79050% off
  • Item No. KESS3MBP10
  • Free Shipping
This is Car OBD and Bench Boot Protocols Activation for KESS V3 Master.

As we know, original ALIENTECH KESS V3 is the one of the most advanced ECU & TCU programmers which combines Kess v2 and Ktag to one tool. This new tool allows users to access system data areas to read, write and clone via OBD, boot and bench modes, remap in a faster, easier way than ever before. Here have collected some customer's feedback. Let's see what ECU type works and what doesn't work with kess3 below.

ALIENTECH KESS V3 User Feedback

 

so far tested old edc15p obd

fiat 9gf_t7 bench

edc17c64 boot and bench

insignia edc17c19 bench

old jag delhi mpc555 bdm fail but ktag worked

mazda r2ak under r2ab obd ok

peugeot dmc3.5 obd ok

psa edc17c10 obd , write 30 seconds ish ok

renault edc17c42 obd ok

ford dcm6.1 obd ok

 

JAGUAR MEDC17.9 BENCH OK

AUDI EDC17C46 BENCH OK

AUDI EDC16CP34 BENCH OK

RENAULT MASTER SID310 BOOT OK

BMW G11 MD1 BENCH OK

NEW 2021 MIN F54 LCI MG1 NOT OK (BUT FLEX TO)

CITROEN EDC17C60 BENCH OK

 

FORD sid209 obd locked ecu, no recovery

(Use TGflash for FORD SID209 (over OBD) with full recovery - Tactrix OpenPort 2 will work fine)

CNH edc16 and EDC7, not wok recovery original and recorded with kess v2 work,

VAG med17.5.5 not read boot, ktag work read

 

BMW Mevd17.1.2 obd not work

marelli 6jf in bench does not work

marelli 6f3 in bench does not work does not connect and in bdm does not calculate the chk

 

mjd603 works with bdm connected for cloning,

crd1.1 on bench but using obd worked

ALIENTECH KESS V3 User Feedback

 

FIAT MJ8F3 BENCH OK

AUDI EDC17CP14 BENCH OK

OPEL EDC16C9 BENCH OK

FORD SID208 BENCH OK

 

PSA SID208 BENCH OK

FORD MED17.2.2 BENCH OK

OPEL EDC16C39 BENCH OK

FIAT 9DF (AFTER 2021) BENCH NOT OK BUT FLEX TO FAIL

I´ve done many SID 206 Ford all ok with Kess 3.

Sid209 ford no read boot mode, read password failed for OBD...With sid 208 ford bench I had no problems but sid 208 PSA I tried endless connections until I was able to write.

 

To be continued…

 

Read also:

Original ALIENTECH Kess V3 User Guide:

http://blog.obdexpress.co.uk/2023/12/13/original-alientech-kess-v3-user-guide-comparison-software-license-support-list/

ALIENTECH KESS V3 ECU & TCU Programmer FAQs

http://blog.obdexpress.co.uk/2023/12/28/alientech-kess-v3-ecu-tcu-programmer-faqs/

www.obdexpress.co.uk