Foxflash and New KT200 ECU programmer can support MEDC17 free clone service while most of others tool need patch the files after reading out. It perfectly solves the problem that the car cannot start normally after writing the original ECU data into the new ECU.
BOSCH EDC17/ME (D) 17/MEV17 TRICORE ECU Clone List:
(For foxflash and New KT200)
CLONE VAG EDC17U01
CLONE VAG EDC17CP14/20
CLONE VAG EDC17CP24
CLONE VAG EDC17C46
CLONE VAG EDC17CP44
CLONE VAG EDC17C54
CLONE VAG EDC17CP54
CLONE VAG EDC17C64
CLONE VAG EDC17C74
CLONE VAG EDC17CP74
CLONE VAG MED17.5.5
CLONE VAG ME17.5.20
CLONE VAG MED17.5.2
CLONE VAG MED17.1.11
CLONE VAG MED17.1.27
CLONE VAG MED17.5.21
CLONE VAG MED17.5.25
CLONE VAG ME17.5.26
CLONE BMW/MINI EDC17CP02
CLONE BMW/MMI EDC17C41
CLONE BMW/MINI EDC17C50
CLONE BMW/MINI EDC17C56
CLONE BMW/MINI EDC17CP45
CLONE BMW/MINI EDC17CP49
CLONE BMW/MINI MED/MEV17.2
CLONE BMW/MINI MEV17.2.2
CLONE BMW/MINI MEVD17.2.8
CLONE BMW/MINI MEVD17.2.G
CLONE BMW/MINI MEVD17.2.H
CLONE CAN-AM ME 17.8.5
CLONE FCA EDC17C49
CLONE FCA EDC17C69
CLONE FCA EDC17C79
CLONE FCA ME17.3.0
CLONE FCA DCU17PC42
CLONE FORD EDC17C10
CLONE FORD EDC17C70
CLONE FORD SID 208
CLONE FORD SID 807
CLONE HYUNDA-KIA EDC17C08
CLONE HYUNDA-KIA EDC17CP14
CLONE HYUNDA-KIA EDC17C53
CLONE HYUNDA-KIA EDC17C57
CLONE HYUNDA-KIA ME17.9.11
CLONE HYUNDA-KIA KME 1.9.3
CLONE IVECO EDC17C49
CLONE IVECO EDC17CP52
CLONE LAND ROVER EDC17CP11
CLONE LAND ROVER EDC17CP42
CLONE MERCEDES EDC17CP01
CLONE MERCEDES EDC17CP10
CLONE MERCEDES EDC17C43
CLONE MERCEDES EDC17CP46
CLONE MERCEDES EDC17CP57
CLONE MERCEDES EDC17C66
CLONE MERCEDES MED17.7.1
CLONE MERCEDES MED17.7.2
CLONE MERCEDES MED17.7.3
CLONE MERCEDES DCU17PC42
CLONE NISSAN ME17.95
CLONE OPEL EDC17C42
CLONE OPEL EDC17C59
CLONE OPEL EDC17CP47
CLONE OPEL EDC17C84
CLONE PSA MED17.4
CLONE PSA MEV17.4
CLONE PSA MED17.4.2
CLONE PSA MEV17.4.2
CLONE PSA MEVD17.4.2
CLONE PSA MEVD17.4.4
CLONE PSA EDC17C10
CLONE PSA EDC17C60
CLONE PSA SID 208
CLONE PSA SID 807
CLONE RENAULT ME17.9.20
CLONE RENAULT EDC17C11
CLONE RENAULT EDC17C42
CLONE RENAULT EDC17C84
CLONE RENAULT DCU17PC42
CLONE SEA-DOO ME17.8.5
CLONE SMART ME17.9.20
CLONE TOYOTA EDC17CP07
CLONE TOYOTA EDC17CP37
CLONE TOYOTA EDC17C73
CLONE VOLVO EDC17CP22
CLONE VOLVO EDC17CP48
How to clone ECU?
Hardware: New KT200/Foxflash ECU Chip Tuning Tool
Software: KTsuit/foxflash software
Mode: BOOT MODE TRICORE/ BENCH TRICORE
Steps:
1.Connect New KT200/Foxflash to ECU correctly, and make sure the internet connection on the computer is good.
2.Run New KT200 KTsuit software or foxflash software
Read the (Micro [flash] and EEPROM data of original ECU (ECU 1) and the new ECU (ECU 2) in BOOT MODE TRICORE or BENCH TRICORE separately
3.Select the driver
TOOL BOOT>> TOOLS BOOT MODE>> INFINEON TRICORE Clone Service>> the corresponding ECU clone option>> Click OK
4.Open the original ECU (ECU 1) micro file and new ECU (ECU 2) micro file in sequence
5.Click "Clone & Save”, and the software will generate the new ECU data and save it in the selected directory.
6.In the software, select TOOLS BOOT MODE>> INFINION TRICORE Boot>> select the corresponding ECU
Choose the new file just created in ECU 2 to write into the new ECU
Note: As the BENCH TRICORE may cause the incomplete writing of ECU data. It’s recommended to read and write in Boot mode.
Please Note!
FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool:
https://www.obdexpress.co.uk/wholesale/foxflash-super-ecu-tcu-tool.html
New KT200 ECU Programmer Master Version With 10 licenses:
https://www.obdexpress.co.uk/wholesale/kt200-ecu-programmer-full-version-with-case.html
