How to use Launch X431 ECU Programmer to read and write Buick Bosch MED9.6.1 ECU on bench?
It's very easy and fast to operate with the wiring diagram in the software. No need X431 tablet! Only 2 mins!
STEP 1.Obtain ECU Model
Connect X431 ECU Programmer to a computer via USB cable
Open X-431 ECU & TCU Programmer software
Input med9.6.1 in the search box to quickly find the ECU model
It's Buick Enclave 2008-2017 3600 V6 300 MED9.6.1_Auto
STEP 2.Connect device and ECU
Double click the ECU to enter the main operation interface
Obtain the wiring diagram by clicking "Direct connection of diagram"
Follow the diagram to connect X-431 ECU Programmer and Bosch MED9.6.1 ECU with the BENCH mode line properly
Connect the power supply to the programmer as well
Start to read and write ECU.
STEP 3. Backup the original MED9.6.1 ECU data
Connect
Read complete data
Save the original data after reading
Disconnect
STEP 4.Backup the new MED9.6.1 ECU data
Connect Launch ECU Programmer to a new ECU, and repeat the same steps to back up the new ECU
STEP 5.Write the original ECU data into new ECU
Upload the original data to write into the new MED9.6.1 Bosch ECU
Write data successfully
Disconnect
LAUNCH X431 X-PROG3 with PC Adapter works with its PC software can clone MED9.6.1 Bosch ECU the same as X-431 ECU Programmer as well.
Besides Buick, both tools support the other brands Bosch MED9.6.1 ECUs below.
Cadillac CTS 2004-2016
Cadillac STS 2004-2011
Chevrolet Camaro 1998-2020
Chevrolet Cobalt 2005-2013
Chevrolet HHR 2006-2010
Chevrolet Traverse 2008-2017
Ferrari 458 Italia 2009-2015
Ferrari 458 Spider 2011
Ferrari Ff 2011
GMC Acadia 2007-2017
Holden Commodore 1999-2017
Opel Insignia 2008-2016
Pontiac Solstice 2006-2008
Saturn Outlook 2008
Saturn Sky 2005-2008
Keep updating…
