OBDSTAR Toyota-30 Cable add keys for 2022 Toyota Tundra (work with Autel IM508S)

Matched product:

OBDSTAR Toyota-30 Cable Proximity Key Programming All Key Lost No Need to Pierce the Harness

€33US$35^.31£28^.25AU$54^.32

• Item No. SF363
• Free Shipping

OBDSTAR Toyota-30 cable is mainly used for all keys lost and password-free matching operation of 8A-BA and 4A models of Toyota's latest smart key box with 30 pins. The TOYOTA-30 cable supports the following models: 2022-Corolla Sharp, Fenglanda, Senna HV, Lingfang, Lingfang HV, Wei HV, Grevia HV, bZ4X, etc. Using Toyota-30 cable, there is no need to break, hook, or plug and unplug wires during operation, and there is no risk of damaging communication wires!

Autel MaxiIM IM508S + OBDSTAR Toyota-30 Cable is able to add 2022 Toyota Tundra key by OBD successfully. The 30PIN cable is designed for OBDSTAR X300 DP Plus & X300 PRO4, meanwhile it also turns out to work perfectly with Autel.

Read also

Autel IM508S + OBDSTAR 30PIN Cable Adds 2023 Toyota Sienna OK

The 30PIN port is in driver's dash panel side, just pop right down. It's that top plug of the module. After successful connection, let's continue.

Step1. Back Up IMMO Data

Unit control >> Keyless system(CAN) >> Back up IMMO data >> Yes

*Ensure the network connection of device is good.

Turn off the ignition, and turn the hazard warning lamps on and off once.

Press "OK".

Read the operation instructions carefully, press "OK".

Reading EEPROM data...

Backup succeed.

Step2. Add Smart Key

Add smart key >> Start

*The function serves to learn keys. Please complete the steps within specified time.

Turn ignition on.

Confirm VIN.

Have you backed up the EEPROM data of this vehicle? Yes

Load the EERPOM data

Reading PIN...

Keep a learned key close to the Start button.

Keep a key to be learned close to the Start button.

Learning succeeded.

Test the new key, it can work normally.

Well done.

www.obdexpress.co.uk