YANHUA BMW FEM Data Desktop Test Platform User Manual
Matched product:
€55US$58.30£47.79AU$91.10
- Item No. SK228-D
- Out Of Stock
100% original YANHUA BMW FEM data desktop test platform can detect FEM/BDC control module in good condition or not.No need to test them on the car, very convenient and efficient.
Test Platform Cable User Manual
1. Wiring Connection
2. Key Position
3. START/STOP button operation
4.How to turn on the engine fire shutoff switch
5.How to turn off the engine fire shutoff switch
Here is the using tips of YANHUA BMW FEM Data Desktop Test Platform source from obdexpress.co.uk
1. Wiring Connection
2. Key Position
Put the key marked with red (see above pic.2) on the coil.
3. START/STOP button operation
D1: START/STOP button’s indicator- light on when the power supply is connected
D2: Automatic stop and start function (MSA) indicator- default status: light off
D3: Engine fire shutoff switch’s indicator (to replace the dashboard and display the status of the engine fire shutoff switch)- light on when the switch is turned on and light off when the engine is turned off
4.How to turn on the engine fire shutoff switch:
Put the working key on the coil;
Press the button;
Engine fire shutoff switch indicator (D3) lights on;
(If the indicator fails to light on, wait for 3-5 seconds and press it again)
5.How to turn off the engine fire shutoff switch:
Press it continuously for 3 times;
Engine fire shutoff switch indicator (D3) lights off- engine fire shutoff switch is turned off
