Product Description
1. Professional immo programming, with X-prog3.
2. Supports CAN FD and DoIP Protocols.
3. All system diagnostic + Active Test (Bi-Directional Control)+ 39 Reset Service Functions.
4. 2 Years free update and multi-language.
5. Added built-in MQB calculator, get MQB sync data for free.
LAUNCH X431 IMMO ELITE Key Programmer Diagnostic Scanner
LAUNCH X431 IMMO ELITE Highlights:
1. It integrates professional anti-theft matching, anti-theft programming, full-model system-wide diagnosis of basic functions and special functions. One machine with multiple functions and high performance cost ratio
2. Added Active Test (Bi-directional Control)
3. All-round anti-theft matching, fast and accurate reading of anti-theft data
4. Read PIN code, Delete anti-theft, Delete key, Matching key, Module replacement and Module cloning
6.Covering the anti-theft matching function of many models in Asia, Europe, and America, more brands continue to be launched, up to 60+ brands
7. Support the full-model system-wide diagnosis of basic functions (read version information, read DTCs, clear DTCs, read data streams) for global 110+ brands
8. Support 39 special functions such as service lamp reset, throttle matching, steering angle reset, brake pad reset, tire pressure reset, ect...
9. Support the VIN intelligent identification function to quickly enter diagnosis
10. Fast and accurate diagnosis
11. FCA "Auto Auth" Access: AutoAuth for FCA SGW which makes X431 works with Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017. (Need to buy)
12. Android 10.0 open system, 8' inch TouchScreen, adopts a 2.0Ghz 4-core high-efficiency processor,4GB RAM + 64GB ROM large storage
13. Multi-language: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Romanian, Serbian, Finnish, Swedish, Czech
14. Two Years Free Update
15. Added built-in MQB calculator, get MQB sync data for free.
LAUNCH X431 IMMO ELITE is the Most Comprehensive Key Programming Scan Tool combines with 2 Years Update, Professional Complete Key Programming, OE-Level All Systems Diagnostics, Bi-directional Control, 39+ Reset Services, and Advanced Services etc. It is equipped with X-PROG3 key programming device to provide complete coverage of IMMO and programming functions. Together with the ability to quickly diagnose all modules of the majority of the makes and models on the market.
Anti-theft advantages
- Support replacement or cloning of VW/Audi MQB platform engine ECU (no need for the original car engine ECU data, it can be read directly from the key)
- Support replacement or cloning of VW/Audi MQB platform gearbox ECU
- Support replacement of Audi (0AW/0B5) fifth-generation gearbox ECU
- Support reading/writing and cloning of VW fourth-generation UDS engine ECU
- Support the cloning in BENCH mode without disassembly for more than 170 types of Bosch engine ECUs, more than 10 types of Siemens engine ECUs, and 18 types of gearbox ECUs (covering various European, American and Asian models, and continuing to increase)
- Support the erasing function for Mercedes-Benz engine, gearbox, EIS, and BMW gearbox.
- Support the matching function and password calculation function for all models of Chery sedan and JAC passenger cars up to 2022
Anti-theft password reading
Support the anti-theft password reading function for models such as for BMW, for Mercedes-Benz, for Volkswagen, for Audi, for Peugeot, for Citroen, for GM, for Nissan, for Hyundai, for Kia, for Chery, for Dongfeng Fengxing, and for JAC passenger cars.
Anti-theft Programming
Support car key chip reading/writing, EEPROM chip reading/writing, MCU chip reading/writing, EEPROM and FLASH reading/writing of engine ECU and gearbox ECU.
Anti-theft Matching
Support 60+ brands of independent anti-theft matching software for American, European, and Asian models. Support further in-depth development and coverage of anti-theft software for various models. Support more password reading, key adding, all keys losing and anti-theft related module replacement functions. Menus are optimized, the operation process is more convenient, and more brands continue to be launched.
Anti-theft module replacement
Support the anti-theft module replacement functionfor models such as for BMW, for Mercedes-Benz, for Volkswagen, for Audi, for Porsche, for Honda, for Nissan, for Hyundai, for Kia, for BYD, for Changan Automobile, for Wuling Baojun, for GAC Trumpchi, for SAIC Maxus, for Great Wall Motor , for Chery, for Dongfeng, for Fengxing, and for JAC passenger cars.
Key matching
Support the key matching function for models such as for Ford, for GM, for Mercedes-Benz, for BMW, for Volkswagen, for Audi, for Porsche, for Peugeot, for Citroen, for Land Rover, for Jaguar, for Honda, for Toyota, for Nissan, for Hyundai, for Kia, for Great Wall Motor, for Chery, for Changan Automobile, for JAC Passenger Cars, for Wuling, for Baojun and for BYD.
Core Functions:
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
LAUNCH X431 IMMO PRO Supports CANFD and DIOP protocol now, it supports For GM after 2020 !
it is the only product in this price range that is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.
Supports For Chevrolet Onix 2020-2021 year
Supports For Chevrolet Tracker 2020 year
Supports For Chevrolet Suburban 2021 year
Supports For Chevrolet Tahoe 2021 year
Supports For Buick
Supports For Cadillac Escalade 2021 year
Supports For Cadillac Escalade 2021 year
Supports For GMC Yukon 2021 year
Supports For GMC Yukon XL 2021 year
Supports For Holden
Supports For DAEWOO
Supports For Alpheon
Supports For Ravon
Supports For Pontiac
Supports For Saturn
Supports For Hummer
XPROG3 Details & Functions:
1. Car key slot --------- Place the car key to perform the key matching function
2. DB26 --------- Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc.
3. Mercedes-Benz key infrared slot --------- Place the Mercedes-Benz infrared key to perform the key matching function
4. Car key chip hole --------- Place the key chip to perform key matching
5. Status indicator --------- Power indicator
6. DIY slot --------- Connect the anti-theft ECU pin through the cable to read and write data
7. Locker Install chip burning socket --------- Complete EEPROM or MCU data read and write operations
8. DC12V power supply --------- Connect DC12 power supply
9. DB15 --------- Connect the main wiring
OE-Level Full System Diagnosis
As an OE level automotive diagnostic tool, LAUNCH X431 IMMO Elite can access most car ECUs to read, clear codes, retrieve live data, freeze frame, ECU information and perform active tests, matching, adaptation, turn off warning lights, reset monitors. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Include: ABS System, Engine System, SAS System, TPMS System, IMMO System, Battery System, Oil Service System, SRS System, DPF System, Air Conditioning System, Transmission System, etc...
Active Test (Bi-directional Control)
Put out the commands to ECUs, read the ecu data and monitor the operation of actuators. Through active tests, also called actuator tests, this bi-directional can precisely locate the car problems, letting you quickly know whether a specific system, component, or subsystem is functioning properly or not. For example, If a fuel pump is not working and leads to ignition failure, it could be a faulty pump, wiring, relay, or command. By turning the fuel pump on and off via the x431 immo elite, you can quickly determine whether it's a wiring, relay, or pump issue without removing any parts. (Note: Functions are not all available and vary by vehicle)
39+ Reset Service:
- ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.
- Oil Reset: Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.
- EPB(Electric Park Brake): Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
- DPF(Diesel Particular Filter) Regeneration: Clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.
- Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.
- SAS(Steering Angle Reset)Reset: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.
- Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.
- Gear Learning:The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running
- SRS Reset: After replacing the Airbag, reset the Airbag data and clear the collision data.
- BMS Matching: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
How to Connect IMMO with X-PROG 3 Well ？
1. DBSCar VII connect the Cable well first .
2. DBSCar VII connect the Tablet PC with USB Cable well.
3. DBSCar VII Connect X-prog 3 with the extend cable ( the cable with the port to connect the power ) well first
4. If has MCU-V3 board, pls plug to PROG3
5. Connect Power cable，pls be mind the power cable need connect X-PROG 3 well ( use the cable in Step 3, if you connect MCU-V3 board , just connect MCU-V3 board directly ), then connect the Bench model Cable connect to X-prog 3 or MCU-V3
6. Use the exchange cable to connect Bench Model cable with the IMMO Model of the car
Remote Diagnose
This option aims to help repair shops or technicians
launch instant messaging and remote diagnosis, making the repair job getting fixed faster.
Intelligent Diagnose
This module allows you to use the VIN information of the currently identified vehicle to access its data (including vehicle information, historical diagnostic records) from the cloud server to perform quick test, eliminating guesswork and step-by-step manual menu selection.
Diagnostic History
This function provides a quick access to the tested
vehicles and users can choose to view the test report or resume from the last operation, without starting from scratch
LAUNCH X431 IMMO ELITE Compatible Models (Need Buy Extra)
1. X431 Videoscope: Check unseen parts of engine, fuel tank system, etc.
2. X431 TSGUN TPMS WAND: Activate all sensors,TPMS relearn,Program LAUNCH sensors
3. X431 RF-Sensor: Copy the original tire pressure sensor data; can be programmed unlimited times
4. X431 PROG: IMMO functions for VAG Group Above 3.5
5. X431 BST360: Battery Health Test, Smart System Test, Charging Health Test, Test Report
6. X431 PRINTER: Print out diagnostic data/ reports
Technical Parameters
Processor : 2.0GHz 4-core
Operating system: Android 10.0
Memory: 4GB
Storage: 64GB
Battery: 47880mWh(7.6V,6300mAh)
Display: 8-inch, 1280*800
Camera: Rear 8MP
WIFI: 2.4GHz/5GHz (dual frequency)
Interface: TYPE A *1 &TYPE C*1
Operating temperature: 0~50℃
Size: 234*166*39.5(mm)
Package List:
1pc x Display tablet
1pc x VCI connector
1pc x Diagnostic cable
1pc x Password envelope
1pc x Power adaptor
1pc x Type-A to Type-C USB cable
1pc x X-PROG 3 immobilizer programmer kit
Shipping Method and Delivery Time:
EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
China Warehouse Shipping:
DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement.
Yanwen Express: 7-10 working days. No Tax for European Countries.
Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
For any question, please contact us at:
Tech Service
LAUNCH X431 IMMO ELITE is a new 2023 professional key matching and programming tool. It is equipped with X-PROG3 key programmer, supports CAN FD and DOIP protocols, and performs All system diagnostic + Active Test (Bi-Directional Control) + 39 Reset Service Functions. Here comes with the quick start guide to use this tool and shares the common problems and solutions for users.
PART ONE
Register& Update& Retrieve Login Password &Connection
How to register and update X431 IMMO Elite?
For new users, you will need to experience a user registration process before getting started.
1.Network Setup
The tablet has built-in Wi-Fi that can be used to get online. Once you're online, you can register your tool, surf the Internet, get apps, send email, launch the remote diagnosis, and check for software updates etc.
- On the home screen, tap Settings>> Network & Internet>> WLAN
- Slide the Wi-Fi switch to ON, the tablet starts searching for available wireless networks
- Select a wireless network
If the chosen network is open, the tablet will connect automatically.
If the selected network is encrypted, a network password will need to be entered.
- When Connected appears, it indicates the Wi-Fi connection is complete.
Note: When Wi-Fi is not required, this should be disabled to conserve battery power.
2.Step-by-step to register and update:
Tap the application icon on the home screen to launch it, and then tap Login to enter the login interface of diagnosis software.
Kindly notice:
If you are a new user, follow A to proceed.
If you have registered to be a member, go to B to login the system directly.
If you have bound a sub-account to this tool, go to C to login the system.
In case you forgot password, refer to D to reset a new password.
A.If you are a new user, tap New Registration to enter the sign-up page.
Fill in the information in each field (Items with * must be filled).
After inputting, tap Register, the following screen will appear:
Input the 12-digit Product Serial Number and 8-digit Activation Code (can be obtained from the password envelope), and then tap Activate
Tap Yes to navigate to the update center to update all available software.
Tap No to ignore it.
In this case, follow steps to check for updates.
- Update Diagnostic Software & APP
Go to Software Update on the Job Menu and tap the Car model tab.
The Car model tab displays a list of vehicle diagnostic software.
Tap Update to start downloading. Once download is finished, the software packages will be installed automatically.
- Update IMMO&IMMO PROG Software
If the user only intends to update the IMMO&IMMO PROG software, go to Software Update and tap the IMMO tab.
Tap Update to start downloading. Once download is finished, the software packages will be installed automatically.
After the registration is successfully complete, the wireless communication between the tablet and the VCI device is automatically established and user has no need to configure it again.
B.If you have registered to be a member input your name and password, and then tap Login to enter the main menu screen directly.
Note: The tablet has an auto-save function. Once the username and password are correctly entered, the system will automatically store it. Next time you login the system, you will not be asked to input the account manually.
C.If you have created a sub-account or bound an existing account to the tool, tap Sub-account login to login.
D.If you forgot the password, follow the steps below to do.
- Tap the application icon on the home screen to launch it
- Tap Login on the upper right corner of the screen
- Tap Retrieve password and then follow on-screen instructions to set a new password.
How to Connect IMMO with X-PROG 3 Well?
- DBSCar VII connect the cable well first
- DBSCar VII connect the tablet PC with USB cable well.
- DBSCar VII connect X-prog 3 with the extend cable (the cable with the port to connect the power) well first
- If has MCU-V3 board, pls plug to PROG3
- Connect Power cable, pls be mind the power cable need connect X-PROG 3 well (use the cable in Step 3, if you connect MCU-V3 board , just connect MCU-V3 board directly ), then connect the Bench model Cable connect to X-prog 3 or MCU-V3
- Use the exchange cable to connect Bench Model cable with the IMMO Model of the car
PART TWO
X431 IMMO Elite Common Problems and Solutions
Problem 1: How to save power?
Solution:
- Please turn off the screen while the tool keeps idle
- Set a shorter standby time
- Decrease the brightness of the screen
- If WLAN connection is not required, please turn it off
- Disable GPS function if GPS service is not in use
Problem 2: Communication error with vehicle ECU
Solution:
- Check if the diagnostic connector is correctly connected
- Check if the ignition switch is ON
- If all checks are normal, send vehicle year, make, model and VIN number to us using Feedback feature.
Problem 3: Failed to enter into vehicle ECU system
Solution:
- Check if the vehicle is equipped with this system
- Check if the VCI dongle is correctly connected
- Check if the ignition switch is ON
- If all checks are normal, send vehicle year, make, model and VIN number to us using Feedback feature.
Problem 4: How to download the X-431 IMMO ELITE App after resetting the tablet?
Solution:
Before registration, please make sure the network is properly connected.
After the tablet has been successfully reset, follow the steps below to download the App:
- Launch the browser and the default official website opens (If a blank page pops up, just type in www.x431.com in the input bar)
- Tap Login, input the username and password and tap Log In
- Make sure that the serial number is correct, tap APP application program and tap the Download icon to start downloading.
- After the download is complete, follow the on-screen instructions to install it.
- After installation, use the existing username and password to login and go to update center to download the diagnostic software.
Problem 5: What to do if the language of vehicle diagnostic software does not match the system language?
Solution:
English is the default system language of the tool.
After the system language is set to the preference language, please go to the update center to download the vehicle diagnostic software of the corresponding language.
If the downloaded diagnostic software is still displayed in English, it indicates that the software of the current language is under development.
For more details about 2023 LAUNCH X431 IMMO ELITE key programmer:
https://www.obdexpress.co.uk/wholesale/launch-x431-immo-elite.html
www.obdexpress.co.uk
