How to use Yanhua Module 28 Clone JLR ZF-9HP Gearbox

Matched product:

YANHUA Mini ACDP Module 28 Module28 for ZF-9HP Gearbox Clone Work via Boot Mode with License A703

€225US$238^.50£195^.50AU$372^.67

• Item No. SK247-28
• Free Shipping

YANHUA Mini ACDP Module 28 for ZF-9HP Gearbox Clone, Support Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox BOOT mode clone.

Yanhua Mini ACDP + Module 28 is able to clone ZF-9HP gearbox BOOT mode, support Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep, etc. Follow the tutorial to learn the procedure.

*Users can check connection diagram in "Help".

Accessories Required

ACDP host

OBP+ICP adapter

20PIN cable

8PIN cable

ZF-9HP-Port interface board

ZF-9HP-BOOT interface board

Copper pillars

Screwdriver

ZF-9HP gearbox computer

Connection

1. Remove the 3 screws of the interface board, install the copper pillars. Put the CPU positioning frame on the CPU.
2. Install ZF-9HP BOOT interface board. Lock it with copper pillars. Install ZF-9HP port interface board. Connect 2 interface boards with 8PIN cable.
3. Connect OBP+ICP adapter with 20PIN cable.
4. Short the CAN resistor on the OBP+ICP adapter to the "CAN-R-JOIN" side. Connect to ACDP host.

Operation

Step1. Backup Data

Mini ACDP>> Jaguar/Land Rover >> Gearbox clone >> ZF_9HP(BOOT) >> Identify >> Continue

Confirm system info.

BOOT pin status detection passed.

Continue >> Continue >> OK

Identify system info finished.

Full backup data >> Continue >> Continue >> Continue

Save data file.

Step2. Write Data

Connect another ZF-9HP gearbox computer.

Full write data >> Continue >> Continue >> Continue >> Load data file

Ready to write chip data, please don't cut the power nor pull out the device during the programming!

Click "Continue".

Writing chip data finished.

www.obdexpress.co.uk