Latest price:€528US$549.12£453.82AU$871.62€490US$509.60£421.16AU$808.897% off
Item No. SR27
Free Shipping
OBDSTAR P50 is the new generation of intelligent airbag reset equipment, which has powerful function and wide coverage, covering 59 brands and over 9500 ECU part No. and some MCU. It's based on RK3128 quad-core processor, extremely fast and smooth; equipped with 5-inch capacitive touch sensitive screen.
This post comes with the guide about how to reset airbag by OBDSTAR P50 on bench.
https://youtu.be/rZneCQtqaK8
Keep OBDSTAR P50 in charging and communication in the whole process. Also ensure the internet connection is normal.
Main operation guide: 1.Connection Select Airbag Reset>> Airbag Reset V30.17 (choose the newest version)>> Auto Search Part Number Note: click ‘Operation instruction’ at the bottom left to check the best detect way. Input the part number of ECU manually Note: The part number can be found on ECU’s label. The number input is case- insensitive. Fuzzy retrieval is supported. Confirm the value entered is correct. Select the related airbag ECU model in the list Refer to the ‘Diagram’ at the bottom left corner to connect cables correctly Different cars are with different airbag ECU, choose the corresponding wiring diagrams. Connect P004 adapter and P50 with the main cable Then connect P004 adapter and airbag ECU with the P004 jumper Set the 120Ωresistance switch of P004 adapter to on 2.Airbag reset Main steps: Read DTC>> Backup EEPROM data>> Erase Crash>> Erase DTC>> Read DTC again Step 1: Read DTC There is a crash fault code (CRASH Event Storage Full and Locked!!!) Step 2: Read and backup EEPROM data Before airbag reset, read EEPROM in advance function and then save it in case of data lost caused by wrong operation. Turn off power button of OBDSTAR P004 adapter for 30 seconds and turn on again Step 3: Erase Crash Choose the EEPROM data saved in the last step to erase crash data Confirm the Read EEPROM function has been executed Erase crash in file success Press ‘Start’ at the left bottom to start Write EEPROM function Turn off power button of OBDSTAR P004 adapter for 30 seconds and turn on again Step 4: Erase DTC Click ‘Erase DTC’ to clear fault code Crash fault code has been erased successfully Step 5: Read DTC again Read DTC again to check the fault code, there is no crash fault code on the screen.
