How to use Autel MD808 Pro do ABS Reset

MaxiDiag MD808 Pro is one of the best Ford code reader scan tools (OBD2 diagnostic tool) on the market today because it is so easy to use. It simply plugs into the diagnostic port of the car and the screen will light up straight away.

Step-by-step here:

• 1.Choose the vehicle module :->"Scan" ->"European"->"EU Ford"

processiung date ,pls wait...
system date initializing, pls wait...

• 2. Start new session establishing vehicle communications may well be able to automatically detect the vehicle

Establishing vehicle communications ,pls wait...

• 3. Then AUTEL MD808 Pro shows our vehicle specification, This is yes to those and we're gonna select our control unit so the first up

vehicle focus
Engine Type: Duratorq turbo diesel
Capacity:1.6L
Transmission: Diesel

Is this correct?
YES!
vehicle focus
Engine Type: Duratorq turbo diesel
Capacity:1.6L
Transimission: Manual
Fuel Type:

• 4.it's come up with ABS anti-lock brake ot traction control module that's exactly
  where we want to be in fact so we're just gonna click OK to that obviously
  There was a list of other systems which you can diagnose as well

System daye initializing
pls wait...
ok straight up every read codes flashing there means it's interrogating

• 5. Then into the  Function menu, choose "Read codes" -> "OK"

Establishing vehicle communications
pls wait...

• 6. Now we get the  C0034 fault codes for the front right abs sensor (wheel speed sensor) but you could also get the front left, rear right or rear left fault)

• 7.Ultimately now is put a new abs sensor in the front right-hand side once we've done that we can click
  on arrays codes and then it will erase the warning

Ignition on and engine off? YES!

Erase codes command sent
perform read codes function to verify
Press any key to contiue

More info for AUTEL MaxiDiag MD808 Pro OBD2 OBDII Car Diagnostic Tool  here: