1. GODIAG GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc.
2. Equipped with PWM+(PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators.
3. Suitable for outdoor work, taking power from the car battery and converting it into a DC12V power supply for 12V charging, programming power, or independent power supply for diagnostic equipment.
4. Provides OBD2 independent PIN4 body GND, PIN5 signal GND, which is convenient for some modules to be used for special programming.
GODIAG GT105 ECU IMMO Prog Adapter OBD II Break Out Box ECU Connector
GODIAG ECU IMMO Prog Adapter GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. It is used for short-circuiting OBD2 in the car for anti-theft activation matching, ECU diagnosis and programming connection, and drawing power from the vehicle’s battery for outdoor on-site vehicle maintenance.
The product is equipped with PWM+(PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators. When there is data communication, the corresponding protocol indicator will flash, therefore the communication status can be judged and you can also determine whether the diagnostic programming device is able to communicate.
The product is suitable for outdoor work, taking power from the car battery and converting it into a DC12V power supply for 12V charging, programming power, or independent power supply for diagnostic equipment.
The device provides OBD2 independent PIN4 body GND, PIN5 signal GND, which is convenient for some modules to be used for special programming. In addition, with the OBD2 full protocol ECU programming cable, users can also connect the ECU in the studio to adjust the ECU programming power. The device has PWM+(PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators. When there is data communication, the corresponding protocol indicator will flash. Users can judge the communication status, and also can judge whether the diagnostic programming device can communicate.
GODIAG GT105 Highlights:
1. A full-protocol ECU connection line for ECU programming power adjustment.
2. OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules.
3. PIN4 and PIN5 can be switched between short-circuit and non-short-circuit.
4. Standard OBD2 independent PIN4, PIN5.
5. Pure copper female seat supports repeated insertion and removal, and has a long service life.
6. Battery clip treated with environmentally friendly salt spray, with a thickness of 0.5mm.
7. The DC car battery cable adopts 0.75mm² 2-core sheathed cable, which supports DC5.5*2.5/ DC5.5*2.1 interface.
8. The DC connector has a resettable 7A fuse.
9. DC power interface, dedicated laboratory power connector.
OBD Battery Replacement Tool
GODIAG GT105 Functions:
IMMO AD power adapter function. After 2016, for Ford all smart keys lost, GT105 cooperates with VVDI equipment (OBDSTAR, AUTEL,) and other anti-theft matching equipment to program the keys.
All car keys lost matching---wake up the meter or wake up the anti-theft ECU. (Support VAG 4th and 5th generation anti-theft, Toyota ECU synchronization, auxiliary Mitsubishi all key lost matching or all lost remote control key setting, old Porsche Cayenne car for anti-theft key learning.)
VPW, CANH, CANL, K-Line indicator lights can judge the communication status between the vehicle and the diagnostic programming device. (If the product is used to connect the device, the user can simply judge whether the diagnostic programming is normal or not according to whether the device can send communication.)
The GT105 power adapter cable obtains 12V power from the car battery. (For programming equipment such as Xhorse Key Tool Plus Pad, VVDI Prog, CGDI Prog, IM608, etc., it provides 12V power supply when they need power outdoors, so as to read the data of BMW BENZ anti-theft ECU, or other car ECUs, and finally realize the on-site maintenance of outdoor faulty vehicles. )
Provide 12V power supply for the key cutter (12V).
Standard OBD2 full protocol ECU programming line. (With MPPS, FGTech, Kess v2, etc., for ECU data reading and writing, ECU cloning, ECU tuning, etc.) (Note: OBD2 full protocol ECU programming line is purchased separately)
Realize the uninterruptible power supply during the battery replacement, so it can prevent data loss, key failure or re-matching caused by power interruption during the battery replacement.
GODIAG GT105 Indicator Light Meaning:
ECU Connection Diagram
1pc x GT105 host
1pc x Power cord with battery clip
Shipping Method and Delivery Time:
EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
China Warehouse Shipping:
DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement.
Yanwen Express: 7-10 working days. No Tax for European Countries.
Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
For any question, please contact us at:
Godiag GT105: Turning Car Batteries into 12V Power
Godiag GT105: wake up ECU via short circuit
How Godiag GT105 detects the communication status with the vehicle?
GODIAG GT105 cable connects the car battery to power the VVDI pad
GODIAG GT105 cable is connected to car battery to supply power to 12V CNC machine
GODIAG GT105 replaces Toyota ECU immobilizer and synchronizes
New arrival! GODIAG GT105 ECU Connector is designed for ECU diagnostic & programming connection, short-circuiting OBD2 in the car, drawing power from battery when outdoor on-site vehicle maintenance. No need manual short-circuit OBD2, no more disassembly.
GODIAG GT105 is equipped with PWM+(PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators & 5 functional buttons.
GT105 Buttons Display
GND 4-5 button: Short-circuit OBD2 PIN4-PIN5.
V1-16 button: VW, AUDI, VAG series car activate anti-theft or wake-up anti-theft system.
T4-13 button: TOYOTA, change the engine ECU, the immobilizer ECU needs to be activated synchronously.
M1-4 button: Mitsubishi remote control matching needs to be short-circuited.
P3-7 button: Old Porsche Cayenne key matching needs to be short-circuited.
What can GT105 OBD2 Connector do?
- IMMO AD power adapter function
Supports to program Ford all keys lost with VVDI, AUTEL, OBDSTAR or other anti-theft matching devices.
- All keys lost matching to wake up the meter or anti-theft ECU.
Including VAG 4th& 5th generation anti-theft, Toyota ECU synchronization, auxiliary Mitsubishi all key lost matching or all lost remote control key setting, old Porsche Cayenne key learning.
- Easy to judge whether programming is normal according to indicator lights.
- Obtain 12V power from car battery.
Provides stable power for outdoor maintenance. Can work with Xhorse Key Tool Plus, VVDI PROG, CGDI Prog, Autel IM608...or key cutting machine.
- Standard OBD2 full protocol ECU programming line(purchased separately).
Can work with MPPS, FGTech, Kess V2...for ECU reading/writing, ECU cloning, ECU tuning.
How to short-circuit GODIAG ECU Connector?
GODIAG GT105 makes short-circuit OBD2 easier, to avoid burning-out caused by misoperation. Each button represents different short circuit methods. Workable for VW, AUDI, TOYOTA, Mitsubishi, old Porsche Cayenne vehicles.
Step1. Press the corresponding button according to short-circuit method of vehicle.
Step2. Turn on ignition, plug GT105 into OBD2 port.
Once the IMMO light flashes, which means it is synchronizing.
How to get outdoor power supply with GT105 cord?
By connecting with GT105 power cord to supply power in case on-site maintenance. Since lots of devices are without outdoor power cords, GT105 has perfectly solved the problem.
Step1. Use GT105 cord to clamp the positive pole & negative pole of storage battery(eg. press T4-13 button for TOYOTA);
Step2. Connect the other end to device directly. Power light will be on after successful connection.
Technical support by: www.obdexpress.co.uk