1. SUPER ICOM PRO N3+ = BMW special inspection + J2534 + DOIP + WIFI.
2. Supports Original BMW ICOM Software.
3. Firmware update via original ICOM firmware file.
SUPER ICOM PRO N3+ Diagnostic Tool Supports DoIP J2534
The N3+ is developed on the basis of BMW's special inspection device A1, A2, A3 and N3. On the basis of inheriting the advantages of these products, N3+ optimizes and upgrades them. It is 100% compatible with the original BWM special inspection software without any software changes, and J2534 and DOIP are added on the basis of the special inspection.
The N3+ is the same as the N3, one code for one machine, and the wireless is bonded with the machine code, which is convenient for customer service and product tracking.
Super ICOM PRO N3+ Highlights:
1. Supports WiFi and USB connection, Compatible with DoIP protocol
2. Firmware update online
3. Replace ICOM Next and ENET cable. Fully compatible BMW ICOM ISTA-D, ISTA-P, INPA, WinKFP, E-sys etc engineering software
4. With OBDII to 20-PIN cable for old BMW and 10-PIN cable for BMW motorcycle
5. Can be used as J2534 Passthru device for ODIS HDS TIS GDS2 SDD etc
To use N3+ as Mercedes
Benz DoIP device, you need to have Mercedes
Benz license activated. ( Contact us, whatsapp: +86 18750906725)
SUPER ICOM PRO N3+ Functions:
N3+= BWM special inspection+ J2534+ DOIP+ WIFI
1. BWM special inspection device(NEXT A3)
N3+ adopts the same technology as BMW's special tester, and its comprehensive performance is much higher than similar products. All BMW's test software can run 100% without any problems, and all test results are 100% consistent with the original factory. The test scope includes BMW cars, motorcycles, Rolls Royce and so on.
2. J2534 device
N3+ can use the J2534 protocol to read through after switching with one key. It is compatible with the 6-pin and 14-pin CAN communication and the 7-pin K-line communication of the OBD port. It can use Volkswagen, Mercedes-Benz, Toyota, Honda, Land Rover and other special inspection software with J2534 interface.
3. DOIP device
N3+ can use DOIP network communication protocol after one-key switching, which can solve the problem that Volkswagen 5054 and Mercedes-Benz C4 cannot test new cars without DOIP.
4. WIFI device
When N3+ uses the BMW special inspection software, it is more convenient and faster to use WIFI, without any configuration on the computer. After one-key switching, WIFI can use BMW's mobile phone hidden functions activation and test software, which can be used to test the DOIP of Mercedes-Benz Volkswagen.
SUPER ICOM PRO N3+ Features:
Synchronized Upgrade with the Original Factory
The firmware of the N3+ product has been refreshed to version 147 when it leaves the factory. The firmware upgrade is synchronized with the original factory and the steps are the same. If there is an update to the firmware in the future, customers can download it from the official website of the original factory and then upgrade.
Wired + Wireless Mode
The communication interface between the N3+ and the computer adopts wired + wireless mode.
Wired mode: Wired adopts standard USB3.0 interface. Compared with the old RJ45 network port of the original factory, we have better compatibility and stronger applicability for existing general-purpose computers and tablets. (The first time you need to set the dedicated IP address)
Wireless mode: The latest low-power consumption design is used for wireless mode, which reduces the heat of the product in use and greatly improves the speed and stability of wireless communication. After one wireless connection, it can be automatically connected after booting. (Wireless needs to be wired disconnected.)
Dual Heat Dissipation Design
The N3+ product adopts a dual heat dissipation design of a fan and a heat sink, which has not yet appeared on the market in the BMW special inspection and greatly improves the durability and stability of the product's communication in high-temperature environments.
Optimized Main Cable
Because the communication protocol of N3+ includes K line, CAN line and local area network (DOIP) communication, in order to ensure the stability of communication, we have optimized and improved the main cable for testing, which is not an ordinary OBD cable.
On the basis of N3, the N3+ adds a one-key switch button, which can be freely switched between the special inspection and J2534 software by pressing and holding it for 3 seconds.
Super ICOM Pro N3+ vs Super MB Pro N3 vs ICOM NEXT
Support Bimmercode Software to Activate Hidden Functions
||Super ICOM Pro N3+
||Super MB Pro N3
|BMW full system diagnostics
|BMW hidden functions activation
||VAG/ BENZ/ TOYOTA/ HONDA/ JLR/ GM GDS2
|Mobile version software
||MHD, Bimmercode, Bimmergeeks
||via a router
BMW Car Test Connections Diagram
BMW Motor Test Connection Diagram
Super ICOM PRO N3+ PCB Display:
1pc x SUPER ICOM PRO N3+ main host
1pc x OBD cable
1pc x USB cable（2 meters long）
1pc x 20-pin round head cable
1pc x 10-pin motorcycle cable
Shipping Method and Delivery Time:
EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
China Warehouse Shipping:
DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement.
Yanwen Express: 7-10 working days. No Tax for European Countries.
Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
For any question, please contact us at:
SUPER ICOM PRO N3+ diagnostic test for HONDA vehicles
SUPER ICOM PRO N3+ Firmware Upgrade
SUPER ICOM PRO N3+ software Demonstration: DTS9.02 MB DOIP
SUPER ICOM PRO N3+ Software Demo: Toyota Techstream
SUPER ICOM PRO N3+ Demonstration: USB Config
SUPER ICOM PRO N3+ Diagnostic Demonstration: DOIP MB C206
SUPER ICOM PRO N3+ Diagnostic Demonstration: CAN MB W211
SUPER ICOM PRO N3+ Demonstration: WiFi CAN BWM
Super ICOM Pro N3+ is a comprehensive diagnostic scanner which has a one-key switch button to freely switch between ICOM software and J2534/ DoIP software, and can work with special test software to test BMW, Mercedes, Volkswagen, Honda, Land Rover, Toyota, etc. It supports both wired connection via USB cable and wireless connection, and adapts the original ICOM solution which allows firmware update online from ICOM server.
To use Super ICOM Pro N3+ BMW diagnostic tool, it needs to connect with wired or wireless network.
1.Connect N3+ with wired network (USB connection)
Plug power supply to N3+ or connect with vehicle via OBD cable, and connect the USB cable of N3+.
Open computer, connect it with the USB cable
Open computer configuration interface, go to settings>> Ethernet>> Change adapter options >>
Realtek USB FE Family Controller network
Right click it and select Properties>> Networking>>TCP/IPV4
Set the IP address and DNS server addresses as below.
- IP address: 169.254.92.90
- Subnet mask: 255.255.0.0S
- Default gateway: 169.254.255.1
- Preferred DNS server: 169.254.255.1
After setting, click OK, and the wired network configuration is completed.
Open ITool Radar software, and select the corresponding option to release. Then you can use the special inspection software to test normally.
If you want to replace a new Super ICOM Pro N3+ BMW diagnostic tool on the same computer, you need to reset the IP address. After the setting is completed, the computer will be bound to N3+, and the network icon will disappear after you unplug the USB cable. After using the N3+ with wired and wireless Internet access, you do not need to set the IP address again.
2.Connect N3+ via WiFi
When you use wireless detection, you need to unplug the USB cable at the end of the computer, and then you will find that the SSID is N3+ ICOM-****.
Connect it directly, and input the password 123456789.
No equipment is required. You can directly use BMW special inspection software.
Fox example, open ISTA+ software, select Vehicle management, and select the related ICOM ID to set up connection. Then the software is ready to use.
How to update Super ICOM Pro N3+ firmware?
First, check the current firmware version and download the newest version. Then follow the ICOM Update instruction to update N3+ firmware below.
Open ITool Radar tool on desktop and check the current ICOM firmware version (i.e.V147)
Free download latest ICOM firmware update files- bootimage and applicationimage
Newest version 149
*Firmware file149/1.49 is compatible with original ICOM and ICOM clone (non-vxdiag solution).
There are three items in the N3+ ICOM firmware folder:
ICOM Update guide, ICOM-ApplicationImage and ICOM-Boot Image bins files.
We’ll take N3+ ICOM V148 as a demonstration. The upgrade guide also applies to V149.
Make sure the Super ICOM Pro N3+ diagnostic scanner is connection to the computer with a USB cable and power on the ICOM with a 12V power adapter.
Access to http://169.254.92.38:60080/ with IE browser, input the user name: root, and password: NZY11502 (must be capital letters), then click “OK”.
Click “Update Firmware” and you will see the version information of ICOM firmware.
Select ICOM-BootImage-01-31-00 Bin file, set the image type to system, and click “Send the file”.
When it says "Write the image file to the flash?”, click “Yes” and the ICOM light will turn red.
When it prompts "The SYSTEM IMAGE update was successful", click “Update Firmware”.
Select ICOM-ApplicationImage-01-48-00 Bin, set the image type to application, and click “Send the file”. The file will take a few minutes.
When it says “Write the image file to the flash?”, click "Yes" and the light of ICOM will turn red for the second time.
When it is all right, click "reboot", and the system is going down now.
After the N3+ firmware upgrade is completed, check the current version again, the firmware version on ICOM Web server and ITOOL Radar is V148 now.
Super ICOM Pro N3+ vs. Super MB Pro N3 vs. BMW ICOM Next: